A goalie save percentage calculator works out the share of shots on goal that a goaltender stops. Enter the saves and the shots on goal, and you get the save percentage as a decimal such as .933 and as a percent. It works for ice hockey, lacrosse and soccer, and it runs in your browser, so nothing you enter is sent anywhere.
What save percentage is
Wikipedia describes save percentage as the percentage of shots on goal a goaltender stops, in ice hockey, lacrosse and association football. It is calculated by dividing the number of saves by the total number of shots on goal. It is often known by symbols such as SV%, SVS%, SVP and PCT. A higher save percentage is better, because the goaltender stops more of the shots they face.
How to use the goalie save percentage calculator
- Enter the number of saves.
- Enter the total shots on goal faced.
- Press Find save percentage.
If you know the goals against instead of the saves, subtract the goals against from the shots on goal to get the saves, and enter that figure.
The formula
Save percentage equals the saves divided by the shots on goal. The shots on goal are the saves plus the goals allowed, so the same figure is 1 minus the goals allowed divided by the shots. The calculator shows the goals allowed as shots minus saves, so you can check your numbers.
Decimal or percent?
The page explains that although the statistic is a percentage, it is often given as a decimal in North America, in the same way as a batting average in baseball. So .933 means that a goaltender saved 93.3 percent of all shots they faced. In international ice hockey, such as the IIHF World Championships, the save percentage is expressed as a true percentage, such as 90.5%. The calculator gives both forms.
Worked example
A goaltender faces 30 shots on goal and makes 28 saves. Twenty-eight divided by 30 is 0.9333, which is written .933, or 93.3 percent. The goaltender allowed 2 goals. If the same goaltender faces 30 shots and makes all 30 saves, the save percentage is 1.000. If a goaltender stops 83 of 100 shots, the save percentage is .830.
Why save percentage is useful
Save percentage measures the goaltender's results against the shots they face, so it does not depend on how many shots the team lets through. The Wikipedia page's goals against average article gives an example: a goaltender who saves 83 percent of shots, but allows a 2.00 GAA, would be considered worse than one who saves 96 percent of shots and has a 4.00 GAA. The first is helped by a team that gives up few shots. For this reason, save percentage is widely used with goals against average to judge a goaltender.
Small samples
A save percentage from a few shots can swing a long way. A goaltender who faces 10 shots and stops 10 has 1.000, and one who lets in 3 goals has .700. Over a season, with hundreds or thousands of shots, the figure settles. When you compare goaltenders, use a similar number of shots for each, and use the same competition.
Team or single game
You can use the calculator for a single game, a season or a career, by entering the totals. For a team's goaltenders together, add up the saves and the shots on goal for all of them. Because the calculation is a ratio of totals, do not average the individual save percentages: add the saves and shots first, then divide.
Using the results
The calculator gives the save percentage as a decimal, the same figure as a percent and the goals allowed. The decimal is rounded to three places, which is the way it is usually printed in North America. The percent figure shows more decimal places, so you can see small differences between two goaltenders whose decimals look the same. The goals allowed figure is just the shots minus the saves, a quick check on your input.
Save percentage with goals against average
Goals against average and save percentage measure different things. The first counts the goals a goaltender lets in per game, which depends on how many shots the team allows. The second counts how many of the shots on goal were stopped. A goaltender on a team that allows few shots can have a low GAA with an ordinary save percentage, and the reverse is true on a team that allows many shots. Looking at both gives a fuller picture. You can work out the first with the GAA calculator.
Comparing goaltenders
To compare two goaltenders, enter the saves and shots for each, and look at the two decimals. If the shots faced are very different, be careful: a goaltender with far fewer shots has a less settled figure. In international ice hockey the figure is written as a percent, such as 90.5%, so you may see the same number written both ways. The calculator shows both, so you can match the way your source writes it.
What if you only know the goals against?
If a source gives the goals against and the shots on goal but not the saves, work out the saves by subtracting the goals from the shots, then enter that number. For example, 32 shots and 3 goals against means 29 saves, and 29 divided by 32 gives .906. The same approach works if you have the save percentage and the shots, and want the saves: multiply the shots by the save percentage and round.
Common mistakes
- Dividing by shots attempted. Only shots on goal count.
- Averaging percentages. Add the saves and the shots first.
- Entering goals instead of saves. Saves are shots minus goals.
- Judging by a few shots. Small samples are unreliable.
What next
Use this often? Add Goalie Save to your Home screen.
Frequently asked questions
What is a goalie save percentage calculator?
A tool that works out the share of shots on goal that a goaltender stops, from the saves and the shots.
How do you calculate save percentage?
Divide the number of saves by the total number of shots on goal.
Why is save percentage written as .933?
It is often given as a decimal in North America, like a batting average. .933 means 93.3 percent of shots were saved.
What is a good save percentage?
Higher is better. Compare goaltenders in the same league with a similar number of shots.
Do I use shots or shots on goal?
Use shots on goal. Shots that miss the net do not count.
Was this tool helpful?
What went wrong?
We only receive the reason you pick, never what you typed into the tool.
Thanks for your feedback.