A GATE score / marks calculator works out your raw marks in the Graduate Aptitude Test in Engineering from the number of questions you got right and wrong, using the official marking scheme with its negative marking for MCQs. Enter your correct and wrong answers for 1-mark and 2-mark MCQs, and your correct MSQ and NAT answers, and this GATE marks calculator shows your total out of 100, the marks you lost to negative marking and your MCQ accuracy. It's useful when the answer key comes out and you want to know where you stand before the results.
GATE marking scheme
The organizing institute's question paper pattern for GATE 2026 sets these rules:
- Every paper is out of 100 marks, in a three-hour computer-based test.
- Questions carry either 1 mark or 2 marks.
- There are three question types: Multiple Choice Questions (MCQ), Multiple Select Questions (MSQ) and Numerical Answer Type (NAT).
- For a wrong answer to a 1-mark MCQ, 1/3 mark is deducted.
- For a wrong answer to a 2-mark MCQ, 2/3 mark is deducted.
- There's no negative marking for wrong MSQ or NAT answers.
- There's no partial marking in MSQ: you get the marks only if your answer is fully correct.
| Question | Correct | Wrong | Not answered |
|---|---|---|---|
| 1-mark MCQ | +1 | −1/3 | 0 |
| 2-mark MCQ | +2 | −2/3 | 0 |
| 1-mark MSQ or NAT | +1 | 0 | 0 |
| 2-mark MSQ or NAT | +2 | 0 | 0 |
How the GATE marks calculator works
Your marks are the marks for correct answers minus the negative marks:
Marks = (1-mark correct) + 2 × (2-mark correct) − (1-mark MCQ wrong) ÷ 3 − 2 × (2-mark MCQ wrong) ÷ 3
Here "correct" includes MSQ and NAT answers as well as MCQs. The calculator rounds the result to two decimal places. It also checks that the questions you've counted don't add up to more than 100 marks, which would mean a count was entered twice.
Worked example
Say that after checking the answer key you have:
- 1-mark MCQs: 18 correct, 6 wrong
- 2-mark MCQs: 20 correct, 9 wrong
- MSQ and NAT: 5 correct 1-mark and 6 correct 2-mark answers
- Marks for correct answers: 18 + 5 + 2 × (20 + 6) = 75.
- Negative marks: 6 ÷ 3 + 2 × 9 ÷ 3 = 2 + 6 = 8.
- Total: 75 − 8 = 67.00 out of 100.
The questions counted are worth 99 of the 100 marks, so one 1-mark question was left unanswered. Of the 53 MCQs you answered, 38 were right, an accuracy of about 71.7%. The 15 wrong MCQs cost 8 marks, which is the price of guessing.
Section-wise marks
Every paper has 15 marks of General Aptitude. In most engineering papers, the remaining 85 marks are subject questions, including 13 marks of Engineering Mathematics that are specific to each paper. Some papers, such as AR, GE, GG, XE, XH and XL, split the subject part into a compulsory section and optional sections. The total is still 100 marks, so this calculator works for every paper: just count all your answers together.
Marks versus GATE score
Your raw marks aren't the same as the GATE score shown on your scorecard. The score is published by the organizing institute with the result, and this calculator doesn't try to predict it. Use it to work out your marks from the answer key, compare them with the qualifying marks for your paper when they're announced, and then check the official result.
Should you guess?
A wrong 1-mark MCQ costs a third of a mark, and a wrong 2-mark MCQ costs two-thirds of a mark. If an MCQ has four options, a blind guess is right one time in four, and on average the penalties from the other three guesses almost cancel the gain. But if you can rule out one or two options, the odds improve. MSQ and NAT questions have no negative marking at all, so it's always worth entering an answer for those.
How to use the GATE score / marks calculator
- Get the official answer key and your response sheet for your paper.
- Go through every question and note whether it's an MCQ, MSQ or NAT, whether it's worth 1 or 2 marks, and whether your answer matches the key.
- Count the MCQs you got right and wrong, separately for 1-mark and 2-mark questions.
- Count the MSQ and NAT answers you got fully right, again separately for 1 and 2 marks. Wrong ones don't need counting, because they don't change your marks.
- Press Calculate marks. Your total out of 100 appears with the marks lost to negative marking.
Leave any box empty if the count is zero. If the tool says your answers add up to more than 100 marks, you've probably counted a question twice or put a 1-mark question in a 2-mark box.
Checking a challenge to the answer key
When a provisional key is released, candidates can usually raise objections, and some answers change in the final key. If a question you answered is changed or dropped, simply update the counts and calculate again to see how your marks move. Keep a list of which questions were MCQs, so you can quickly move one from wrong to correct.
Common mistakes
- Applying negative marks to MSQ or NAT. Only MCQs lose marks.
- Using −1/3 for 2-mark MCQs. A wrong 2-mark MCQ costs 2/3 mark.
- Counting a partly right MSQ. MSQs have no partial marks, so count it as not correct.
- Treating marks as the GATE score. The score out of 1,000 is calculated separately.
What next
Use this often? Add GATE Score / to your Home screen.
Frequently asked questions
How does the GATE score / marks calculator work?
It adds the marks for correct answers and subtracts 1/3 mark for each wrong 1-mark MCQ and 2/3 mark for each wrong 2-mark MCQ. Wrong MSQ and NAT answers don't lose marks.
Is there negative marking in GATE?
Yes, for MCQs only: 1/3 mark for a wrong 1-mark MCQ and 2/3 mark for a wrong 2-mark MCQ. There's no negative marking for MSQ or NAT questions.
Is there partial marking for MSQ in GATE?
No. You get the marks for an MSQ only if your answer is completely correct.
How many marks is the GATE paper?
Every GATE paper is out of 100 marks, with 15 marks of General Aptitude.
Does it show my official GATE score?
No. It gives your raw marks out of 100 from the answer key. The official GATE score is published with the result.
Was this tool helpful?
What went wrong?
We only receive the reason you pick, never what you typed into the tool.
Thanks for your feedback.