Saved

Press the star next to a tool's name to save it.

All my tools

Gallons per Square Foot Calculator

Use this gallons per square foot calculator to turn a liquid depth into gallons per square foot and per square metre, the total volume over an area, or the area a volume covers.

Restored your last values ·

Enter the depth of the liquid. To find the volume over an area, add the area. To find the area covered by a volume, choose that mode and enter the gallons, or the litres in metric mode.

Everything is worked out in your browser. Nothing you type is sent anywhere.

–

–

Choose what to find, enter the depth, then press Calculate.

See full result

A gallons per square foot calculator converts a depth into the volume of liquid that sits on every square foot of ground, or finds the area that a given number of gallons covers at that depth. Enter the depth in feet, inches, centimetres or metres, and then the area or the volume.

How to use the gallons per square foot calculator

  1. Choose US or metric units and what to find.
  2. Enter the depth and pick its unit.
  3. Add the area to get the total volume, or the volume to get the area covered.
  4. Press Calculate.

The idea: depth times 7.48

A volume of V cubic feet holds V × 7.48052 US gallons. If the liquid fills an area A to a height H, then V = A × H, and so the gallons per square foot are H in feet times 7.48052. The area drops out, which is why the depth alone gives the gallons per square foot. The constant 7.48052 is 1,728 cubic inches in a cubic foot divided by 231 cubic inches in a US gallon, and the US liquid gallon is legally defined as exactly 231 cubic inches [1]. The division is our own working.

A worked example

For an area of 100 square feet and a depth of 2 feet, the gallons per square foot are 2 × 7.48052 = 14.96104. The volume is 100 × 14.96104 = 1,496.10 gallons, and in square metres the figure is 161.04 gallons. The tool prints 161.039 for the second figure, which is the exact product of 14.96104 and 10.7639. This example is our own working.

Square metres and litres

To change gallons per square foot into gallons per square metre, multiply by 10.7639, the number of square feet in a square metre. This is the reciprocal of 0.09290304, the number of square metres in a square foot [2]. The litre figure uses 3.785411784 litres to the US gallon [1]. The example above is 161.039 gallons per square metre, or 609.6 litres per square metre. In metric mode you type the area in square metres and the volume in litres, and the tool converts them for the arithmetic.

Finding the area from the gallons

The tool also finds the area that a volume covers. The square feet per gallon are 1 divided by the depth in feet and by 7.48052, which is the same as dividing by the depth and multiplying by about 0.133681, and the area is the gallons times that rate. This is our own working. As our own example, 20 gallons at a depth of half a foot is 3.74026 gallons per square foot, so the area is 5.347 square feet. The tool shows 0.267361 square feet per gallon because it divides 1 by 3.74026 directly instead of rounding the constant.

Depth units

The depth can be entered in feet, inches, centimetres or metres. The tool changes it to feet first, with 1 inch as one twelfth of a foot, 1 centimetre as 0.01 metres and 1 foot as 0.3048 metres, which are standard definitions. A depth of 6 inches gives the same 3.74026 gallons per square foot as half a foot, and 30.48 centimetres gives 7.48052, the figure for one foot.

A very deep column

Try a very deep column of water, say 36,037 feet. Times 7.48052 that gives 269,575.5 gallons per square foot, which the tool prints as 269,575.5. This example is our own working. It makes a useful point. The figure counts the liquid in a column of one square foot, and it has nothing to do with how the water pressure rises with depth.

Any liquid, not just water

The arithmetic is volume per footprint, so it works for any liquid, whether water, oil or a liquid fertiliser. This is our own observation. The tool uses no coverage rate, number of coats or spread rate, so it is not a paint or stain coverage calculator. For stain, use the deck or fence tools, which divide an area by the coverage of a gallon. This tool starts from a depth instead.

US and metric modes

In US mode, areas are in square feet and volumes in gallons. In metric mode, areas are in square metres and volumes in litres. The depth unit is chosen separately, so you can enter a depth in inches in either mode. The gallon is always the US liquid gallon, because the US liquid gallon is the one defined as exactly 231 cubic inches [1]. The imperial gallon is a different, larger unit.

Everyday uses

A quick check that we worked out ourselves: one inch of water on one square foot is 7.48052 ÷ 12 = 0.623 gallons. So an inch of rain on a 1,000 square foot roof gives about 623 gallons. The same arithmetic gives the water to fill a shallow pond to a set depth, or the liquid to flood a bed to a given level. Enter the depth in inches and the area to get the answer.

Limits

The result assumes a flat, level base and the same depth over the whole area, so a sloping bottom or a curved edge needs a different calculation. The tool does not find a base area from a length and width, so multiply the length by the width yourself and type the area.

Common mistakes

  • Using the wrong gallon. The tool uses the US liquid gallon, which is smaller than the imperial gallon.
  • Mixing depth units. Pick the depth unit that matches your measurement.
  • Treating it as paint coverage. It converts a depth to a volume and does not use a spread rate.
  • Forgetting that litres are used in metric mode. Type the volume in litres there.

What next

Use this often? Add Gallons per to your Home screen.

Frequently asked questions

What is a gallons per square foot calculator?

A tool that converts a liquid depth into the gallons on each square foot, or finds the area that a given volume covers at that depth.

How many gallons are in a square foot of water 1 foot deep?

A cubic foot holds 7.48052 US gallons, so a square foot of water 1 foot deep holds 7.48052 gallons.

How do I convert gallons per square foot to gallons per square metre?

Multiply by 10.7639, the number of square feet in a square metre.

How do I find the area that gallons will cover?

Divide the gallons by the gallons per square foot, which is the depth in feet times 7.48052.

How many gallons per square foot is an inch of rain?

One inch is one twelfth of a foot, so it is about 0.623 gallons per square foot. This is our own working.

What went wrong?

We only receive the reason you pick, never what you typed into the tool.

Thanks for your feedback.

More Unit Converters