A freight class calculator turns the size and weight of a shipment into its density and the freight class on the density scale. Enter the length, width, height and weight of one pallet or box, and it gives the volume in cubic feet, the density in pounds per cubic foot and the class, from 50 to 400.
How to use the freight class calculator
- Choose US or metric units.
- Enter the length, width and height of one handling unit, including the pallet.
- Enter the weight of that unit.
- Add the number of units or a rate if you want totals, then press Calculate.
What freight class is
Freight class is a number that carriers use to price less-than-truckload shipping. The National Motor Freight Traffic Association, or NMFTA, publishes the classification, and the classes run from 50 to 500 [2]. A low class is for dense, easy-to-ship goods and costs less per pound. A high class is for light, bulky or fragile goods. The class depends on four factors, which are density, handling, stowability and liability [2].
Density comes first
Density is weight divided by volume, in pounds per cubic foot, often written as PCF. The NMFTA article on density explains it as the weight of a shipment divided by the space it takes up, and advises you to include the pallet or packaging in the measurements [1]. A shipment of 500 pounds that fills 53 cubic feet is far lighter for its size than one of 500 pounds that fills 10 cubic feet, so it falls in a higher class and costs more to move.
How the volume is found
The volume in cubic feet is the length times the width times the height, all in inches, divided by 1,728, the number of cubic inches in a cubic foot. This is our own working. The height of the pallet is added to the height of the load, as the NMFTA advice says. In metric mode, the calculator changes centimetres to inches and kilograms to pounds first, using 2.54 centimetres to the inch and 0.45359237 kilograms to the pound.
The density scale
The NMFTA article, published in June 2025, gives a table of thirteen density bands [1]. Under 1 pound per cubic foot is class 400, then 300 up to 2, 250 up to 4, 175 up to 6, 125 up to 8, 100 up to 10, 92.5 up to 12, 85 up to 15, 70 up to 22.5, 65 up to 30, 60 up to 35 and 55 up to 50. A density of 50 or more is class 50. The calculator uses these bands.
A worked example
Take a pallet of 48 by 40 by 48 inches that weighs 500 pounds. The volume is 48 times 40 times 48, which is 92,160 cubic inches, and dividing by 1,728 gives 53.333 cubic feet. The density is 500 divided by 53.333, or 9.375 pounds per cubic foot. That falls in the band from 8 up to under 10, so the class is 100. This example is our own working. The calculator gives the same figures when you enter them.
Boundaries between bands
Each band starts at its lower limit, so a density of exactly 10 is in the band that starts at 10 and is class 92.5, not class 100. A density of exactly 50 is class 50. The table words each band as "but less than" the next limit [1], and reading the lower limit as part of its band is our own interpretation. Small differences in the size you enter can move a shipment across a boundary, so measure with care.
A second example
Take a load of 3 by 4 by 5 feet that weighs 260 pounds. The volume is 60 cubic feet and the density is 260 divided by 60, or 4.33 pounds per cubic foot. That falls in the band from 4 up to under 6, so the class is 175 on the NMFTA table [1]. This example is our own working. A density close to the edge of a band, like this one, is where a small measuring error can change the class.
Several units in one shipment
Enter the size and weight of one handling unit and the number of identical units. The class is worked out from the density of one unit. The tool also gives the total volume and weight of the shipment. How a carrier treats a mixed shipment, or one where only the total weight is shown on the papers, is not covered by this tool, so ask the carrier if the rule matters.
Estimating a cost
If you enter a rate per 100 pounds, or per 100 kilograms in metric mode, the calculator multiplies it by the total weight and divides by 100. This is a simple estimate that is our own working. Real rates depend on the carrier, the class, the distance and extras that this tool does not model, so use it only to compare options.
Limits of the density scale
Many goods have a class that is set by an item listing and not by density alone, and this is why the NMFC page lists four factors [2]. Rules on rounding are not set out in the pages we read, so the calculator does not round. Round the size up yourself if your carrier does, and ask the carrier or check the NMFC for the class that will be billed.
Common mistakes
- Leaving out the pallet. Include its height in the height of the load.
- Using the wrong unit. Check inches and pounds, or choose metric.
- Entering the total weight of several units. Enter one unit and set the number of units.
- Taking the class as final. The carrier decides the class that is billed.
What next
Use this often? Add Freight Clas to your Home screen.
Frequently asked questions
What is a freight class calculator?
A freight class calculator finds the density of a shipment from its size and weight and gives the class from the density scale.
How is freight class worked out?
Density is the weight divided by the volume in cubic feet, and the class is the band of the density table that contains it.
What is the freight class of a load of 9.375 pounds per cubic foot?
It is class 100, as 9.375 is in the band from 8 up to under 10.
Does density decide the freight class on its own?
No. Many goods are classed by an NMFC item listing that also weighs handling, stowability and liability.
Should the pallet be included in the size?
Yes. The NMFTA article advises including pallets and packaging in the measurements.
Sources
Was this tool helpful?
What went wrong?
We only receive the reason you pick, never what you typed into the tool.
Thanks for your feedback.