Saved

Press the star next to a tool's name to save it.

All my tools

Fip Calculator

Use this FIP calculator to work out a pitcher's fielding independent pitching from home runs, walks, hit batters, strikeouts and innings pitched.

Restored your last values ·

More options

Enter the home runs, walks, hit batters, strikeouts and innings pitched. Write partial innings as .1 for one out and .2 for two outs. The constant puts FIP on the same scale as ERA: leave it blank to use 3.00, or enter the constant for the league and season you want.

Everything is worked out in your browser. Nothing you type is sent anywhere.

–

–

Enter the pitching totals and press Calculate FIP.

See full result

A FIP calculator works out fielding independent pitching: a measure of a pitcher's effectiveness based only on what the pitcher controls most directly, the home runs, walks, hit batters and strikeouts. Enter the totals and the innings pitched, and the calculator gives the FIP, scaled to look like an earned run average. It runs in your browser and nothing you enter is sent anywhere.

What FIP is

Wikipedia explains that fielding independent pitching aims to measure a pitcher's performance without the effect of the defence behind them. It uses the outcomes that do not depend on fielders: home runs, walks, hit batters and strikeouts. Balls put in play are left out, since the fielders influence what happens to them. The result is put on the scale of earned run average, so that a FIP of 3.50 reads like an ERA of 3.50.

How to use the FIP calculator

  1. Enter the home runs, walks, hit batters and strikeouts.
  2. Enter the innings pitched. Write a third of an inning as .1 and two thirds as .2.
  3. Leave the constant blank to use 3.00, or enter your own.
  4. Press Calculate FIP.

The formula

The main formula on the Wikipedia page is thirteen times the home runs, plus three times the walks, minus two times the strikeouts, all divided by the innings pitched, plus a constant. The page also gives a version called DICE, which counts hit batters with the walks and uses a constant of 3.00: 3.00 plus (13 times the home runs plus 3 times the walks and hit batters, minus 2 times the strikeouts) divided by the innings pitched. This calculator uses that form, and with hit batters set to 0 it is the main formula.

The FIP constant

The constant is there to put FIP on the same scale as ERA. The Wikipedia page defines it as the league ERA minus the same formula applied to the league totals: the league ERA minus (13 times the league home runs plus 3 times the league walks minus 2 times the league strikeouts) divided by the league innings pitched. This makes the league's FIP equal the league's ERA. The constant changes a little from season to season and between leagues, and the calculator uses 3.00 if you leave it blank, as in the DICE form. Enter a different value if you know the constant for the season.

Worked example

A pitcher allows 20 home runs and 40 walks, hits 5 batters, strikes out 180 and pitches 180 innings. Thirteen times 20 is 260, three times 45 is 135, and two times 180 is 360. The sum is 260 plus 135 minus 360, which is 35, and 35 divided by 180 is 0.19. With a constant of 3.10, the FIP is 3.29. With the default constant of 3.00, it is 3.19.

Entering innings

Baseball writes partial innings as .1 and .2, meaning one out and two outs, not tenths. So 200.2 innings is 200 and two thirds. The calculator converts these to decimals: 200.2 becomes 200.667. If you enter .3 or higher, it will ask you to check the figure.

Reading FIP

A lower FIP is better, as with ERA. Compare a pitcher's FIP with their ERA: if the ERA is much higher than the FIP, the pitcher may have been unlucky or had poor fielding, and if it is much lower, they may have been lucky or had a strong defence. FIP is not a prediction on its own, so look at the sample size, because a small number of innings gives a noisy figure.

Variants

The Wikipedia page describes related versions of the formula. One counts the hit batters and leaves out intentional walks. Another, xFIP, replaces the home runs with an expected number based on the fly balls and the league home run rate, which the page says is typically about 10.5 percent of fly balls. This calculator gives the standard form with an optional hit-batter term.

Using the results

The calculator shows the FIP, the figure before the constant is added, and the innings pitched as a decimal. The figure before the constant is useful if you want to apply a constant of your own: add it to that figure to get the FIP. If you only want to compare pitchers, you can use the same constant for each, since it moves every result by the same amount and does not change the order.

Comparing FIP with ERA

Earned run average counts the runs a pitcher gives up, including the ones that depend on the fielders and on the luck of where balls land. FIP leaves those out. To compare, work out the FIP with the calculator and set it next to the pitcher's ERA. A pitcher whose ERA is well above the FIP gave up more runs than their strikeouts, walks and home runs would suggest. A pitcher whose ERA is well below it may have had help from the defence. This makes FIP a useful second view alongside the ERA, not a replacement for it.

Which numbers to use

Take the totals from a box score, a season page or a record of the games you are interested in. Use the same period for every figure: the home runs, walks, hit batters, strikeouts and innings must all cover the same games. If a source does not list hit batters, leave that box blank, and the calculator will treat them as zero.

Why the weights differ

The formula gives a home run thirteen times the weight of a strikeout's one, three times for a walk, and takes two for each strikeout away. The weights reflect how much each event usually costs or saves in runs. A home run is the most costly, a walk is a smaller cost, and a strikeout is a benefit because it avoids a ball in play.

Common mistakes

  • Entering innings with the wrong notation. .1 means one out, not a tenth.
  • Comparing different constants. Use the same one for every pitcher.
  • Forgetting hit batters. Leave them blank only if you want the basic form.
  • Reading too much into few innings. Small samples are noisy.

What next

Use this often? Add Fip to your Home screen.

Frequently asked questions

What is a FIP calculator?

A tool that works out fielding independent pitching, which measures a pitcher using home runs, walks, hit batters and strikeouts.

What is the FIP formula?

(13 × home runs + 3 × walks − 2 × strikeouts) ÷ innings pitched, plus a constant. The DICE form counts hit batters with the walks and uses 3.00.

What is the FIP constant?

A league constant that puts FIP on the ERA scale. It is the league ERA minus the formula applied to league totals.

How do I enter partial innings?

Use .1 for one out and .2 for two outs. 180.1 means 180 and a third.

Is a high or low FIP better?

Lower, as with ERA.

What went wrong?

We only receive the reason you pick, never what you typed into the tool.

Thanks for your feedback.

More Fun & Lifestyle Tools