Saved

Press the star next to a tool's name to save it.

All my tools

Fibonacci Retracement Calculator

Use this Fibonacci retracement calculator to place the 23.6%, 38.2%, 50% and 61.8% levels between a high and a low, after a rise or a fall.

Restored your last values ·

Enter the high and low of the price move you want to measure and say whether it was a rise or a fall. The calculator places the common retracement levels between them.

Everything is worked out in your browser. Nothing you type is sent anywhere.

–

–

Fill in the boxes and press Calculate.

See full result

A Fibonacci retracement calculator marks the price levels that traders watch after a market moves sharply up or down. Enter the high and the low of the move and say whether it was a rise or a fall, and the calculator places the common retracement levels of 23.6, 38.2, 50 and 61.8 percent between them, together with the 0 and 100 percent points. Add the current price to see how much of the move has already been given back.

The Fibonacci retracement formula

Range = high − low
After a rise: level = high − range × ratio
After a fall: level = low + range × ratio
Ratios: 23.6%, 38.2%, 50%, 61.8%

The method takes two extreme points on a chart and divides the vertical distance between them by Fibonacci ratios. The common levels are 23.6, 38.2, 50 and 61.8 percent, with 0 percent marking the start of the retracement and 100 percent a complete reversal to the original price. The 61.8 percent level corresponds to the golden ratio. The calculator turns those percentages into prices.

How to use the Fibonacci retracement calculator

  1. Choose the direction of the move: a rise or a fall.
  2. Enter the high of the move.
  3. Enter the low of the move.
  4. Optionally enter the current price.
  5. Press Calculate to see each level.

Worked example

A share rises from $100 to $150, a move of $50. After a rise, the retracement levels are measured down from the high. The 23.6 percent level is 150 − 50 × 0.236 = $138.20, the 38.2 percent level is $130.90, the 50 percent level is $125.00 and the 61.8 percent level is $119.10. If the share now trades at $130, it has given back $20 of the $50 rise, a retracement of 40 percent, which puts it just below the 38.2 percent level.

Rises and falls

The direction decides which end the levels are measured from. After a rise, traders look for the price to pull back toward the levels below the high; after a fall, they look for a bounce toward the levels above the low. For a fall from $150 to $100, the 61.8 percent level is $100 + $50 × 0.618 = $130.90, the mirror image of the rise. Choosing the wrong direction gives levels in the wrong places, so check that the high and low come from the same move.

How traders use the levels

The levels are static prices that do not change, and they are treated as possible inflection points, where a price may pause or turn. Traders often look for a level that lines up with another signal, such as a previous high or low, before acting. The levels also give a simple way to describe how deep a pullback is, as a share of the move before it.

What the evidence says

The significance of these levels could not be confirmed by examining the data. Arthur Merrill found no reliably standard retracement, and tests over thousands of stocks found retracements of 38, 50 and 62 percent were no more likely to appear than any other values. That is why the levels are best treated as convenient reference points rather than rules that prices obey. Many traders still use them because so many others watch the same prices.

Choosing the high and low

The result depends entirely on which high and low you pick. Use the clear turning points of a single move, not intraday spikes that quickly reversed, and use the same type of price each time, such as closing prices or the day's extremes. Two people who pick slightly different points will get slightly different levels, which is another reason not to treat any one level as exact. For other price calculations, the stock calculator works out gains and losses, and the percentage calculator shows percentage moves.

Where the ratios come from

The ratios are linked to the Fibonacci sequence, in which each number is the sum of the two before it: 1, 1, 2, 3, 5, 8, 13, 21 and so on. Dividing a number by the one after it approaches 0.618, and dividing by the number two places later approaches 0.382. The 50 percent level does not come from the sequence, but it is included because traders commonly watch the halfway point of a move. For the sequence itself, try the Fibonacci calculator.

Using the levels with care

Because the levels are only reference points, it helps to decide in advance what you will do if a price passes straight through one of them. Many people treat a level as an area rather than an exact price, allowing a small margin either side, since the high and low you chose are themselves a matter of judgement. Keeping notes of how prices behaved around the levels on charts you follow is a simple way to judge for yourself whether they are useful for the markets you trade, rather than relying on what others claim.

Common mistakes

  • Mixing the high and low of different moves. Use one clear swing.
  • Choosing the wrong direction. After a rise, levels sit below the high.
  • Treating levels as certain. The evidence for them is weak.
  • Ignoring the bigger picture. A level is only one piece of information.

What next

Use this often? Add Fibonacci Re to your Home screen.

Frequently asked questions

How does a Fibonacci retracement calculator work?

It multiplies the size of the move by each ratio and measures that distance back from the high after a rise, or up from the low after a fall.

What are the levels for a rise from $100 to $150?

$138.20, $130.90, $125.00 and $119.10 for 23.6%, 38.2%, 50% and 61.8%.

Which Fibonacci retracement levels are common?

The common levels are 23.6%, 38.2%, 50% and 61.8%.

Do prices really respect Fibonacci levels?

The significance of these levels could not be confirmed by examining the data.

Why is 61.8% important?

It corresponds to the golden ratio.

What went wrong?

We only receive the reason you pick, never what you typed into the tool.

Thanks for your feedback.

More Finance Tools