Saved

Press the star next to a tool's name to save it.

All my tools

Employee Turnover Calculator

This employee turnover calculator works out the turnover rate from headcounts and leavers, with quits, layoffs and other rates, retention and an annualized estimate.

Restored your last values ·

Optional: split the leavers by type to see each rate. If you leave Employees who left blank, these are added up.

Count people on the payroll, full-time and part-time. Don't count contractors or agency temps.

Worked out in your browser. Nothing is sent anywhere.

Turnover rate

–

Enter the headcounts and the number who left, then press Calculate.

See full result

An employee turnover calculator works out what share of your workforce left during a month, quarter or year. Enter the number of employees at the start and end of the period and how many left, and this employee turnover calculator gives the turnover rate, an annualized estimate for shorter periods, separate rates for quits, layoffs and other leavers if you split them, and your retention rate.

The turnover formula

The U.S. Bureau of Labor Statistics measures turnover in its Job Openings and Labor Turnover Survey (JOLTS). Its technical note says the separations rate is computed by dividing the number of separations by employment and multiplying by 100, and that the quits, layoffs and discharges, and other separations rates are computed the same way. This calculator uses the average of your starting and ending headcount as employment:

Turnover rate = employees who left ÷ ((employees at start + employees at end) ÷ 2) × 100

What counts as a separation

JOLTS defines separations as all employees separated from the payroll during the period, in three groups:

  • Quits: employees who left voluntarily. Retirements and transfers to other locations are counted with other separations instead.
  • Layoffs and discharges: involuntary separations initiated by the employer, such as layoffs with no intent to rehire, positions eliminated through mergers or downsizing, firings for cause, terminations of seasonal employees, and layoffs lasting more than 7 days.
  • Other separations: retirements, transfers to other locations, deaths, and separations due to employee disability.

Transfers within the same location, employees on strike, and workers from temp agencies, contractors or consultants aren't counted.

Who counts as an employee

JOLTS counts as employed everyone on the payroll who worked during or received pay for the pay period, including full-time and part-time, permanent, short-term and seasonal, salaried and hourly workers, and those on paid leave. It leaves out proprietors and partners of unincorporated businesses, unpaid family workers, people on unpaid leave or on strike for the whole pay period, and staff from temp agencies, employee leasing companies, contractors or consultants. Use the same rules for your starting and ending headcount.

Worked example

A company starts the year with 120 employees and ends it with 130, so the average is 125. During the year, 15 people left: 10 quit, 3 were laid off or discharged, and 2 retired. The turnover rate is 15 ÷ 125 × 100 = 12%. The quits rate is 8%, layoffs and discharges 2.4%, and other separations 1.6%. If 108 of the original 120 are still there at the end, the retention rate is 90%.

Monthly, quarterly and annual rates

JOLTS publishes monthly rates. If you calculate turnover for a month or a quarter, the calculator also shows a simple annualized estimate: the monthly rate times 12, or the quarterly rate times 4. For example, 3 leavers in a month with an average of 125 employees is 2.4% for the month, or about 28.8% a year if that pace continued. For an exact annual figure, use the year's total leavers and average headcount, or follow the BLS approach of dividing the sum of the 12 monthly separations by the sum of the 12 monthly employment levels.

How to use the employee turnover calculator

  1. Choose the period: a month, a quarter or a year.
  2. Enter the headcount at the start and the end.
  3. Enter how many left, or split them into quits, layoffs and other.
  4. Add the starting employees still there to see retention.
  5. Press Calculate.

Turnover and retention

Turnover looks at everyone who left, including people hired during the period who then left. Retention looks only at the people you started with and how many stayed. A business can have high turnover in a few hard-to-fill roles while keeping most of its long-standing staff, so looking at both, and at quits separately from layoffs, gives a clearer picture.

Reading your result

A turnover rate on its own doesn't tell you whether it's good or bad. It depends on your industry, the kind of roles, the time of year and how your business is changing. Seasonal businesses expect leavers at the end of a season, while roles that take a long time to learn are costly to refill. Track your rate the same way every period and watch the trend. Splitting leavers into quits, layoffs and other separations shows whether people are choosing to leave, or whether changes in the business are driving the numbers.

What to count consistently

Decide once how you'll count part-time staff, people on leave, rehires and seasonal workers, then use the same rules every period so your rates can be compared over time. Count each person who leaves once, even if they were rehired later; a rehire is counted as a new hire, not as an undone separation. For large organizations, work out rates by department or location as well as overall, because a high rate in one team can be hidden by a low rate elsewhere.

Common mistakes

  • Counting contractors or agency temps.
  • Comparing a monthly rate with someone else's annual rate.
  • Counting internal transfers as leavers.
  • Using only the starting headcount when staff numbers changed a lot.

What next

Use this often? Add Employee Tur to your Home screen.

Frequently asked questions

How does the employee turnover calculator work?

It divides the number of employees who left by the average of the starting and ending headcount and multiplies by 100, the same way BLS computes its separations rate.

What is the formula for employee turnover rate?

Turnover rate = separations ÷ average number of employees × 100.

What counts as a separation?

Quits, layoffs and discharges, and other separations such as retirements, transfers to other locations, deaths and disability.

How do I annualize a monthly turnover rate?

Multiply the monthly rate by 12, or a quarterly rate by 4, for a rough annual estimate.

What is the difference between turnover and retention?

Turnover counts everyone who left; retention is the share of the starting employees who are still there at the end.

What went wrong?

We only receive the reason you pick, never what you typed into the tool.

Thanks for your feedback.

More Finance Tools