What this email open rate calculator does
An email open rate tells you what share of delivered emails were opened. This email open rate calculator works it out from four counts that every email platform reports: sent, bounced, opened and clicked. It also gives the click rate, the click-to-open rate and the bounce rate, so you can see how a campaign performed from one set of numbers.
The formulas are the ones most email platforms use. Wikipedia notes that email platforms let businesses track open rates, click-through rates and other metrics, but it does not set out the formulas. [2] The definitions below are therefore a common industry convention, and a few platforms count slightly differently. Check your own platform before you compare numbers.
How to use the calculator
- Enter the number of emails you sent.
- Enter the bounces, which are emails that were not delivered. Leave it blank if you do not know.
- Enter the opens your platform recorded.
- Enter the clicks on links in the email. Leave it blank if you only need the open rate.
- Press Calculate to see the rates.
The formulas
- Delivered = sent − bounced.
- Open rate = opened ÷ delivered × 100.
- Click rate = clicked ÷ delivered × 100.
- Click-to-open rate = clicked ÷ opened × 100.
- Bounce rate = bounced ÷ sent × 100.
Open rate uses delivered emails rather than sent emails because a bounced email never reaches an inbox, so it had no chance of being opened. The bounce rate is the only one of the five that uses the sent count as its base. The click-to-open rate measures how well the content of an email works once someone has opened it, because it ignores everyone who did not open.
Worked example
You send a newsletter to 10,000 addresses. 200 bounce, 2,450 opens are recorded and 245 clicks follow.
| Rate | Working | Result |
|---|---|---|
| Delivered | 10,000 − 200 | 9,800 |
| Open rate | 2,450 ÷ 9,800 × 100 | 25% |
| Click rate | 245 ÷ 9,800 × 100 | 2.5% |
| Click-to-open rate | 245 ÷ 2,450 × 100 | 10% |
| Bounce rate | 200 ÷ 10,000 × 100 | 2% |
Type 10000, 200, 2450 and 245 into the boxes and the calculator returns the same five figures.
Why open rates are less reliable now
Apple describes Mail Privacy Protection as helping users prevent senders from knowing when they open an email, and it also masks their IP address. [1] When a mail app loads images on the reader’s behalf, a tracking pixel can fire even if the person never read the message. That can push the recorded open count up. Other privacy tools and image blocking can push it down.
Because of this, a high open rate no longer proves a high number of readers. Clicks, replies and sales are firmer signs of interest. Use the open rate to compare one campaign with the next from the same list, and do not set strict targets on it alone.
How to read each rate
- Open rate: a guide to how well the subject line, sender name and send time worked, with the caution above.
- Click rate: how many delivered emails led to a click. It is a more honest signal of interest than opens.
- Click-to-open rate: how persuasive the content was for those who opened. A low figure with a good open rate often means the message or the call to action needs work.
- Bounce rate: a list health check. A rising bounce rate usually means old or mistyped addresses that should be removed.
Tips for better results
- Compare like with like. A promotional blast and a welcome email will not perform the same way.
- Track trends over several sends instead of judging a single campaign.
- Clean your list regularly to keep the bounce rate low.
- Test one change at a time, such as the subject line, so you know what caused any shift.
Common mistakes
- Using sent instead of delivered as the base for the open rate. This makes the rate look lower than your platform shows.
- Counting repeat opens. Most platforms report unique opens, and mixing unique and total opens gives odd results.
- Comparing your rate with a figure from a different platform that counts opens another way.
- Entering more opens than delivered emails. The calculator flags this as an error.
The calculator works in your browser and does not store the numbers you enter. Results are rounded to two decimal places for display.
Setting up a fair comparison
Rates only mean something when two campaigns are measured the same way. Before you compare, check that both use the same definition of an open, the same list type and a similar send time. A message to loyal customers will usually beat a message to a cold list, and a plain text note can behave differently from a heavily designed one. Write the settings down next to each result so that you remember what changed.
It also helps to keep a simple log. Each time you send, record the date, the list size, the four counts and the rates from this calculator. After a few months the log shows your normal range, and an unusual result stands out straight away. A sudden fall in open rate with a steady click rate, for example, often points to a change in how opens are tracked rather than a real loss of interest.
When the numbers look wrong
- An open rate above 100% means the opens figure counts repeat opens or the delivered base is too small. Use unique opens and delivered emails.
- A click rate above the open rate usually means opens are being under-counted, for example by blocked images. Rely on the click rate in that case.
- A very high bounce rate can come from a purchased or very old list. Pause and clean it before the next send.
- A click-to-open rate of 0% with many opens means the email gave readers no reason to click, or the link was hard to see.
What next
Use this often? Add Email Open R to your Home screen.
Frequently asked questions
How do you calculate email open rate?
Divide the number of opened emails by the number delivered, then multiply by 100. Delivered means sent minus bounced. With 2,450 opens and 9,800 delivered, the open rate is 25%.
What is a good email open rate?
It depends on your list, industry and how your platform counts opens. Compare your own campaigns over time instead of chasing a single target figure.
What is the click-to-open rate?
It is clicks divided by opens, times 100. It shows how many people who opened the email went on to click a link.
Why does the email open rate calculator use delivered emails?
A bounced email never reached an inbox, so it could not be opened. Using delivered emails as the base gives a fairer open rate.
Does Apple Mail Privacy Protection change open rates?
It can. Apple says the feature helps stop senders knowing when an email is opened, so recorded opens may not match real reading.
Sources
Was this tool helpful?
What went wrong?
We only receive the reason you pick, never what you typed into the tool.
Thanks for your feedback.