An effective duration calculator measures how sensitive a bond's price is to changes in interest rates, using prices from a pricing model rather than the bond's fixed cash flows. Enter the current price, the price if yields fall by a set amount, the price if they rise by the same amount, and the size of the shift. The calculator gives the effective duration, the price change for a one basis point move, and an estimate of the price change for any yield change you want to test.
The effective duration formula
Effective duration ≈ (P− − P+) ÷ (2 × P0 × Δy)
The central-difference formula is below, where P+ and P− are the model prices with the yield curve shifted up and down by Δy and P0 is today's price. When cash flows depend on rates, as with callable bonds or mortgage-backed securities, prices are taken from a model, and the effective duration is estimated from small up and down shifts of the curve. Δy is written as a decimal in the formula, so a shift of 50 basis points is 0.005.
How to use the effective duration calculator
- Enter the current price, P0.
- Enter the price if yields fall by the shift, P−.
- Enter the price if yields rise by the shift, P+.
- Enter the size of the shift in basis points.
- Optionally enter a yield change to estimate the price change, and press Calculate.
Worked example
A bond is priced at 100. A pricing model says that if yields fall by 50 basis points its price rises to 102.5, and if yields rise by 50 basis points its price falls to 97.6. The effective duration is (102.5 − 97.6) ÷ (2 × 100 × 0.005) = 4.9 ÷ 1 = 4.9. That means the price changes by roughly 4.9 percent for each one percentage point change in yields. A 25 basis point rise would lower the price by about 4.9 × 0.25 = 1.225 percent, to about 98.78.
Checking with a simple bond
For a bond whose cash flows don't change with rates, effective duration should match modified duration. A standard example is a three-year zero-coupon bond yielding 5 percent a year, whose modified duration is about 2.857. Its price is 100 ÷ 1.05³, about 86.38. Pricing it at yields one basis point lower and higher and entering those prices in the calculator gives an effective duration of about 2.857, the same as the modified duration. A 25 basis point rise then lowers the price by about 0.71 percent.
Why effective duration is needed
Modified and Macaulay duration assume a bond's cash flows are fixed. Many securities don't work that way. A callable bond is likely to be repaid early if rates fall, which caps how much its price can rise. A mortgage-backed security's payments speed up when homeowners refinance at lower rates. For these, the price must come from a model that reflects how the cash flows change, and effective duration measures sensitivity from those model prices. That is why the calculator asks for prices rather than coupon and maturity.
DV01 and price value of a basis point
The price value of a basis point, also called DV01, is the price times modified duration times 0.0001. The calculator works it out with the effective duration: in the example, 4.9 × 100 × 0.0001 = 0.049, so each basis point move changes the price by about 4.9 cents per 100 of face value. Traders use DV01 to size hedges, because it turns duration into an amount of money. Multiply it by the size of your holding in hundreds to get the money effect for a whole position.
Limits of duration estimates
Duration-based estimates work best for small, parallel shifts in the yield curve. For larger moves, the curvature of the price–yield relationship, called convexity, becomes important, and effective convexity is reported alongside effective duration for securities with options. The model prices themselves also depend on the assumptions inside the model, so two models can give different effective durations for the same bond. For prices and yields of ordinary bonds, try the bond calculator or the present value calculator.
Duration of a portfolio
For a portfolio, work out the effective duration of each holding, then take the average weighted by the market value of each holding. A portfolio with an effective duration of 6 would lose about 6 percent of its value if yields rose by one percentage point across the curve, all else equal. Comparing that figure with the timing of the payments you need to meet helps you judge whether the portfolio's sensitivity to rates suits your needs.
Choosing the size of the shift
The shift should be small enough that the price change is close to a straight line, but large enough that the model prices differ by more than rounding. If you try two different shift sizes and get noticeably different durations, the bond's price is curving over that range, a sign that convexity matters for it. Whatever size you choose, use exactly the same shift up and down, and enter the prices with enough decimal places that small differences are not lost.
Common mistakes
- Entering the shift as a percent. Enter basis points; 50 bp is half a percentage point.
- Swapping P− and P+. The price is higher when yields fall.
- Using uneven shifts. The up and down shifts must be the same size.
- Applying the estimate to large moves. Convexity matters more as moves grow.
What next
Use this often? Add Effective Du to your Home screen.
Frequently asked questions
How does an effective duration calculator work?
It takes the price when yields fall minus the price when they rise, divided by twice the current price times the shift.
What is the effective duration if a bond at 100 moves to 102.5 and 97.6 for ±50 bp?
(102.5 − 97.6) ÷ (2 × 100 × 0.005) = 4.9.
What is the difference between effective and modified duration?
Effective duration uses model prices, so it works for bonds whose cash flows change with rates.
What is DV01?
The price change for a one basis point move: price × duration × 0.0001.
When are duration estimates reliable?
For small, parallel shifts in yields, because duration is a first-order estimate.
Was this tool helpful?
What went wrong?
We only receive the reason you pick, never what you typed into the tool.
Thanks for your feedback.