Saved

Press the star next to a tool's name to save it.

All my tools

Drops to mL Converter

Use this drops to mL converter to turn drops into milliliters or back, choosing the pharmacy 20 per mL drop, a US or UK drop, or an IV drip set rate.

Restored your last values ·

A drop is not a fixed volume, so choose the definition you need. The pharmacy drop is the usual default.

The volume of a drop depends on the dropper and the liquid, so pick the definition that matches your source. This converts volumes only and is not for medicine doses.

Everything is worked out in your browser. Nothing you type is sent anywhere.

Result

–

Enter an amount and press Calculate.

See full result

This drops to mL converter turns a number of drops into milliliters, and milliliters back into drops. A drop is not a fixed unit, so you choose which definition to use: the pharmacy standard of 20 drops per milliliter, a US or UK drop, or one of the drip rates on IV sets. It also shows the answer in teaspoons, fluid ounces or liters.

With the common 0.05 mL drop, 20 drops make 1 mL, and 100 drops make 5 mL, about one US teaspoon.

How to use the drops to mL converter

  1. Choose US or metric for the extra units shown.
  2. Choose drops to milliliters or milliliters to drops.
  3. Pick the drop size you want to use.
  4. Enter the amount and press Calculate.

Why a drop is not an exact unit

Wikipedia explains that the volume of a drop is not well defined. It depends on the device and technique that makes the drop, on gravity, and on the viscosity, density and surface tension of the liquid. Water, oil and syrup all fall in different sized drops, and a thin dropper gives smaller drops than a wide one. That is why the converter asks which definition you want.

The drop sizes in the converter

  • Pharmacy (metric): exactly 0.05 mL, or 20 drops per milliliter. Pharmacists rounded the drop to this value when they moved to metric measurements.
  • US customary: one drop is 1/72 of a US fluid dram, which is 5/6 of a minim and about 0.0513 mL.
  • UK: one drop is one imperial minim, 1/480 of an imperial fluid ounce, or about 0.0592 mL.
  • IV drip sets: 10, 15, 20 or 60 drops per milliliter, depending on the tubing. A 60 drop set is a micro-drip.

The formulas

Milliliters = drops × milliliters per drop
Drops = milliliters ÷ milliliters per drop

For the pharmacy drop, that is milliliters = drops ÷ 20.

Worked examples

How many milliliters are 100 drops? With the 0.05 mL drop the answer is 5 mL, which is 1.01 US teaspoons. With the US customary drop the same 100 drops come to 5.134 mL, and with the UK drop 5.919 mL, so the definition changes the answer by almost 20 percent.

Now an IV example. A 15 drop per milliliter set that delivers 60 drops holds 4 mL. And to find the drops in 1 mL of liquid with the US drop size, divide 1 by 0.0513 to get about 19.5 drops.

A short history of the drop

In the first decade of the 19th century the minim, the smallest unit of apothecary measure, was promoted as an alternative to the drop. People had noticed that a drop varies with the viscosity and specific gravity of the liquid and the size and shape of the vessel it comes from. The minim was defined as one sixtieth of a fluid dram or one four hundred and eightieth of a fluid ounce, which is about 61.6 microliters in the US and 59.2 microliters in Britain. Pharmacists later moved to metric and rounded the drop to exactly 0.05 mL, which is why 20 drops per milliliter is the usual rule today.

Dropwise addition in the lab

In chemistry a procedure may call for adding a liquid dropwise. Wikipedia notes that one chemist may take that to mean one drop per second while another means five to ten drops per second, so careful procedures also state the total time or the rate of addition. When the exact amount of a reagent is unimportant it is sometimes given as a number of drops, with each drop taken as about 0.05 mL. That practice has declined in usage as measured syringes and pipettes became common.

Converting to teaspoons and fluid ounces

A US teaspoon is 4.929 mL, and a US fluid ounce is 29.574 mL. At 20 drops to the milliliter, a teaspoon holds about 99 drops and a fluid ounce about 591. The converter shows these figures when you choose US units, and shows liters when you choose metric. For larger quantities, switching to teaspoons, tablespoons or milliliters is more accurate than counting.

Where drops are used

Drops are used to give doses of liquid drugs, in cooking for flavorings and extracts, and in laboratory work. A chemist may add a reagent dropwise, and when the exact amount is unimportant the drop is typically treated as about 0.05 mL. Prescription labels abbreviate a drop as gtt, from the Latin gutta.

This converter converts volumes only. It does not work out medicine doses. For any medicine, follow the label or ask a pharmacist or doctor, because drops from different bottles can contain different amounts of the drug.

Common mistakes

  • Assuming every drop is the same. A drop from a wide dropper is larger than one from a fine tip.
  • Mixing definitions, for example counting UK drops but converting with the pharmacy value.
  • Using drops for large amounts, where the small error in each drop adds up.

Tips for measuring drops

  • Hold the dropper straight up and down so every drop forms the same way.
  • Use the same bottle and dropper each time, since the opening changes the drop size.
  • For larger amounts, measure in milliliters or teaspoons with a syringe or spoon instead of counting drops.
  • Check the label if it states the number of drops per milliliter for that product.

For other kitchen and lab volumes see the volume converter, and to convert milliliters of a liquid to grams use the mL to grams converter. The mg to mL converter handles concentrations.

What next

Use this often? Add Drops to mL to your Home screen.

Frequently asked questions

How many drops are in a milliliter?

With the pharmacy standard of 0.05 mL per drop there are 20 drops in 1 mL. IV sets deliver 10, 15, 20 or 60 drops per milliliter, and a US customary drop gives about 19.5.

How do I use a drops to mL converter?

Choose the drop size, enter the number of drops and the converter multiplies by the milliliters per drop. For example, 100 drops of 0.05 mL is 5 mL.

How many mL is one drop?

About 0.05 mL by the common pharmacy rule. A US customary drop is about 0.0513 mL and a UK drop about 0.0592 mL.

Why does the size of a drop change?

A drop depends on the dropper, gravity and the liquid's viscosity, density and surface tension, so it is only an approximate unit.

How many drops are in a teaspoon?

With the 0.05 mL drop a US teaspoon of 4.93 mL holds about 99 drops. With the US customary drop it holds 96.

What went wrong?

We only receive the reason you pick, never what you typed into the tool.

Thanks for your feedback.

More Unit Converters