A dead pixel test fills your whole screen with one solid colour at a time so you can spot any pixel that is not behaving. Press Start, click through black, white, red, green and blue, and look for dots that stay dark, stay bright or show the wrong colour. It works on a monitor, laptop, phone browser or TV that has a web browser, and everything runs on this page with nothing uploaded.
What a defective pixel is
Wikipedia describes a defective pixel as a pixel on a liquid crystal display that is not working properly. The same article says similar faults can occur in the sensors of digital cameras. On a screen the fault shows up in a few different ways, so a good test checks more than one colour.
The kinds of fault the test shows
- Dark dot (often called a dead pixel): the article explains this is usually a transistor stuck in a state that blocks light, so the pixel stays black. A dark dot is easiest to see on the white screen.
- Bright dot (hot pixel): all three sub-pixels let light through, so the pixel is always lit. It is easiest to see on the black screen.
- Stuck sub-pixel: one of the red, green or blue parts is always on, so the spot stays red, green or blue whatever the picture. It stands out on a screen of a different colour.
- Line faults: a broken connection can make a whole row or column black. The article lists this as a tape automated bonding fault, and a line like that is hard to miss on any colour.
How to use the dead pixel test
- Clean the screen with a soft dry cloth, because dust looks like a dot.
- Turn the screen brightness up, and turn off any night light or colour filter.
- Press Start full screen. The page fills the screen with black.
- Look closely at the whole screen, including the corners, then click to move on to white, red, green and blue.
- Press Esc to leave full screen. Use Next colour and Previous colour if you want to go back to one.
Why these five colours
Each colour reveals a different kind of fault. Black hides everything except pixels that are stuck on, white shows pixels that are stuck off, and the red, green and blue screens show stuck sub-pixels, since a sub-pixel that is always on stands out when the rest of the screen is a different primary colour. Going through all five takes under a minute and covers the common faults.
What to do if you find a fault
The article says stuck pixels can often be fixed with software tools called pixel refreshers, which flash colours on and off quickly and may dislodge a liquid crystal that is stuck. It also describes cases where a refresher had no effect on a dark dot. For a row or column fault, the article says the LCD module has to be replaced. Many dead pixels cannot be repaired, so the practical step is to check your warranty. Do not press on the screen, because pressure can damage it.
Warranty and manufacturer policy
The Wikipedia article explains that the old standard ISO 13406-2 describes classes of pixel faults, and that Class I allows none at all. Some manufacturers will replace a screen for any defect, others only above a set number of dead pixels or when faults are grouped in one area, and some do not follow the standard at all. The article gives an example of one dead pixel or three stuck sub-pixels in a five by five pixel area, and notes that clusters of dead pixels are usually returnable. Check the leaflet in the box or the manufacturer's website for the policy that applies to your model, and run this test as soon as you buy a screen, while the return period is still open.
Testing a new screen
Test a new monitor, laptop, tablet or TV on the day it arrives. Run the five colours in a dim room, since faults are easier to see against a dark background. Note where each fault is, for example the top left corner, and take a photograph with your phone close to the screen. If you need to return the screen, a clear photo with the colour showing helps.
Privacy
The colours are drawn on this page by your browser. Nothing is uploaded or stored, and the test does not need a camera or any permission.
Dead pixels on phones, tablets and cameras
The same test works on any device with a browser, including a phone or a tablet. Open the page, press the start button and tap through the colours. On a small screen a fault is harder to see, so hold the device close and look at one part of the screen at a time. The Wikipedia article adds that similar faults can occur in the sensors of digital cameras, but a camera sensor cannot be tested by filling a screen with colour. For that, take a photo with the lens cap on or of an even surface and look for spots that appear in every picture.
Why dead pixels appear
The article lists several causes. A transistor that controls a pixel can get stuck, impurities in the liquid crystal can cause a bright dot, and a manufacturing step can cut the colour film badly. A broken connection from physical shock, or from flexing the screen frame during transport or wall mounting, can cause a line that runs across a row or column. Dead pixels also tend to occur in clusters, so if you find one, look at the area around it.
Common mistakes
- Mistaking dust for a dead pixel. Wipe the screen first.
- Testing in bright light. Faults are easier to see in a dim room.
- Checking only one colour. Use all five.
- Pressing on the screen. It can cause more damage.
What next
Use this often? Add Dead Pixel T to your Home screen.
Frequently asked questions
What is a dead pixel test?
A way to find faulty pixels by filling the screen with one solid colour at a time, so dark, bright and wrong-colour dots stand out.
How do I run the dead pixel test?
Press Start full screen, then click to step through black, white, red, green and blue, looking at every part of the screen. Press Esc to leave.
What is the difference between a dead pixel and a stuck pixel?
A dead pixel is dark because it blocks light. A stuck pixel stays lit, usually as red, green or blue, and does not change with the picture.
Can a dead pixel be fixed?
Sometimes a stuck pixel responds to a pixel refresher tool, but many dead pixels cannot be repaired. Check your warranty.
Does the test store or upload anything?
No. It only draws colours on the page.
Sources
Was this tool helpful?
What went wrong?
We only receive the reason you pick, never what you typed into the tool.
Thanks for your feedback.