A cricket follow-on calculator checks whether the side that batted first has a big enough lead to ask the other side to bat again at once. Choose the length of the match, enter the two first-innings scores, and the calculator shows the lead, the lead needed and whether the follow-on can be enforced. It runs in your browser and nothing you enter is sent anywhere.
What the follow-on is
Wikipedia explains that in cricket a side that bats first and builds a big lead may require the other side to follow on, which means to bat again immediately instead of the leading side taking its turn. Under Law 14 the lead needed depends on the length of the match: 200 runs in a match of five days or more, 150 runs in a match of three or four days, 100 runs in a two-day match and 75 runs in a one-day match.
How to use the cricket follow-on calculator
- Choose the length of the match.
- Enter the first-innings score of the side that batted first.
- Enter the first-innings score of the other side.
- Press Check the follow-on.
How the calculation works
The lead is the first score minus the second score. The follow-on can be enforced when that lead is at least the number of runs in the table for the match length. The calculator also shows how many runs above or short of the minimum the lead is. If the second side scores more than the first, the lead is negative and the follow-on cannot be enforced.
Worked examples
The Wikipedia article gives two matches from India's 2017 tour of Sri Lanka, both Tests of five days. In the second Test, India made 622 for 9 declared and Sri Lanka made 183, a lead of 439, which is 239 runs above the 200 needed, and India enforced the follow-on, going on to win by an innings and 53 runs. In the first Test, India made 600 and Sri Lanka 291, a lead of 309, which is 109 above the minimum. The Indian captain chose not to enforce the follow-on, and India won by 304 runs. A three-day match with scores of 300 and 160 gives a lead of 140, which is 10 short of the 150 needed.
The captain decides
The follow-on is not automatic. The captain of the side that batted first, the leading side, decides whether to enforce it. The article says conventional theory usually favours enforcing it when it is available, but it also lists reasons not to. The calculator tells you whether the choice is open, but not whether it is wise.
Which match length to choose
Choose the length that applies to the match, as it was scheduled. Wikipedia notes that if the start of a match is delayed by whole days, the required lead falls to match the number of days left, and if the match is shortened after it has started, the lead does not change. If you are in doubt, check the rules of your competition, because some competitions set their own conditions.
After the follow-on
If the follow-on is enforced, the side that batted second bats again straight away. That can end the match quickly if they are bowled out again for less than the lead. The leading side then needs only a small total, or none at all, to win by an innings. A side that is made to follow on and builds a big total can still draw or even win, though it is rare.
Reasons to enforce and reasons to decline
The Wikipedia article says that conventional theory usually favours enforcing the follow-on when you can, because it gives the bowling side the chance to finish the match sooner, and it keeps the tired bowlers from having to bat. It also lists reasons not to, so the decision depends on the match. Captains weigh up things such as the state of the pitch, how fresh the bowlers are and the weather. The article's example from the first Test in Sri Lanka, where India's captain led by 309 and declined, shows that the choice is a real one.
Using the calculator for a limited-overs or club match
The follow-on is a feature of multi-day cricket. It does not apply in one-innings limited-overs matches. In a two-day or one-day match played with two innings, the leads of 100 and 75 runs apply. Check the competition rules, since some club competitions have their own conditions for the follow-on or do not allow it.
How the first innings lead changes during a match
The lead is worked out when the side that batted second finishes its first innings. Before that, you can use the calculator with the current score of the second side to see how far behind it is: as that score rises, the lead falls, and the follow-on may no longer be possible. The sooner the second side passes the first side's total minus the required lead, the safer it is from being asked to follow on.
Avoiding the follow-on as the batting side
For the side that batted second, the target is to reach the first side's score minus the required lead. In a five-day match, that is the first side's total less 200. If the first side made 400, the second side needs 201 to avoid the follow-on. Enter the totals in the calculator to see the gap. Batters often play carefully as the score nears this mark, and it is a common sight in Test matches.
Common mistakes
- Choosing the wrong match length. The lead needed depends on it.
- Using the second-innings scores. Use the first innings of each side.
- Assuming it is automatic. The captain decides.
- Forgetting the lead can be negative. Then there is no follow-on.
What next
Use this often? Add Cricket Foll to your Home screen.
Frequently asked questions
What is a cricket follow-on calculator?
A tool that checks whether the side that batted first leads by enough runs to ask the other side to follow on.
How many runs are needed to enforce the follow-on?
200 in a match of five days or more, 150 in three or four days, 100 in two days and 75 in one day, according to Law 14 as Wikipedia describes it.
Is the follow-on automatic?
No. The captain of the leading side decides whether to enforce it.
What is the follow-on lead for a Test match?
200 runs, since a Test lasts five days.
Does the lead change if the match is shortened?
Wikipedia says the lead falls if whole days are lost before the start, but it does not change if the match is shortened after it starts.
Sources
Was this tool helpful?
What went wrong?
We only receive the reason you pick, never what you typed into the tool.
Thanks for your feedback.