A contact lens vertex calculator converts a spectacle prescription to the power needed at a different distance from the eye, most often for a contact lens that sits on the eye. Enter the sphere, the vertex distance and, if needed, the cylinder and axis. The result is arithmetic only, not a prescription.
How to use the contact lens vertex calculator
- Enter the sphere power and the vertex distance in millimetres.
- For a toric prescription, add the cylinder and the axis.
- Leave the new distance empty for a contact lens, or enter the new distance for glasses.
- Press Calculate.
What the vertex distance is
The vertex distance is the gap between the back of a spectacle lens and the front of the eye. Because a contact lens sits on the eye, a strong spectacle power has to be adjusted. The compensation is F_c = F ÷ (1 − x F), with x the change in vertex distance in metres, and the sign of the power must be kept [1]. It can also be written F_c = (F⁻¹ − x)⁻¹ [1]. The calculator uses the first form.
The formula used here
In the same form, F_c = F ÷ (1 − d F), where d, in metres, is the starting vertex distance minus the final one, and the final distance for a contact lens is zero. The distance d is positive when the lens moves towards the eye. This reading of the signs is our own working. The calculator takes your two distances in millimetres and divides by 1,000.
Plus powers
For a plus lens, the contact lens needs more power than the glasses. For example, +8 dioptres at 10 millimetres becomes 8 ÷ (1 − 0.08) = 8 ÷ 0.92 = 8.70 dioptres, our own arithmetic from the formula. Likewise +6.5 dioptres gives 6.95. Enter the sphere as a positive number, and leave the cylinder empty, to see these figures.
Minus powers
For a minus lens, the contact lens needs less power. At 14 millimetres, −8.00 dioptres becomes −8 ÷ 1.112 = −7.19 dioptres, our arithmetic from the formula. The tool shows signs with a plus or minus, so you can see at a glance which way the power moves, and it keeps the minus sign that eye care records use.
Toric prescriptions
For a prescription with a cylinder, the tool works in three steps: compensate the sphere S to get S', find the power of the second meridian M = S + C and compensate it to get M', then the new cylinder is C' = M' − S', and the axis does not change. This is our own working, applying the formula to each principal meridian. For −8.00 / −4.25 × 45 at 14 millimetres, S' = −7.19 and M' = −10.46.
A rounding note
The result is C' = −3.26 by exact arithmetic. A hand calculation that subtracts values already rounded to two decimals gives −3.27. The tool follows the exact arithmetic, so you may see a difference of 0.01 dioptre from such a hand result. A second example, −8.75 / −5.00, gives −7.80 and −3.74.
Rounding to 0.25 D
Lenses are made in steps, so the tool also shows each value rounded to the nearest 0.25 dioptre. Rounding to the nearest 0.25 dioptre is our own practical convention, not a rule we found in a standard. The tool rounds the sphere and the cylinder separately. Which power is actually ordered is for the eye care professional to decide.
Glasses to glasses
The same formula works when a spectacle lens moves, by setting the new distance to a number above zero. If the old distance is 12 millimetres and the new one is 16 millimetres, d is −0.004 metres and +8 dioptres becomes 8 ÷ 1.032 = 7.75 dioptres. To go from a contact lens back to glasses, enter 0 as the first distance and the frame distance as the second.
A warning about an example
A published contacts-to-glasses example is not reproduced here. By the formula the figure is about −8.85 dioptres, and that source then says −8.75 or −9, which is inconsistent [1]. We also do not claim when compensation matters clinically, because the source we read does not say so, and it does not cover the fit, the base curve or the rotation of a toric lens.
Using the calculator
Enter the sphere and the distance from the prescription, add the cylinder and the axis if there are any, and press the button. Read the compensated power, the rounded values and the working. Always treat the answer as a way to check the arithmetic, and take the prescription to a professional for the lens that is really ordered.
How big the change is
For small distances, the change in power is roughly the distance in metres times the square of the power, so doubling the power roughly quadruples the change. This is our own approximation. At 12 millimetres, +4 dioptres becomes 4.20, a change of 0.20 dioptres, while +8 dioptres becomes 8.85, a change of 0.85. Low powers hardly change at all, which is why the vertex distance matters mostly for strong prescriptions.
Entering the prescription
Type the sphere power as printed, with its sign, such as −8 or +6.5. Leave the cylinder empty for a spherical prescription. The axis is only repeated in the result, because it does not change in this method. The vertex distance of the prescription goes in the first distance box, and the second box stays empty for a contact lens.
Common mistakes
- Using the wrong sign. Keep the minus sign of the prescription.
- Entering the distance in centimetres. Use millimetres.
- Forgetting the cylinder. A toric prescription needs the second meridian.
- Ordering lenses from this result. Only a professional can prescribe them.
What next
Use this often? Add Contact Lens to your Home screen.
Frequently asked questions
What is a contact lens vertex calculator?
A tool that converts a spectacle power to the power needed at another distance from the eye, with F' = F ÷ (1 − d F).
What is the vertex distance?
The distance between the back of a spectacle lens and the front of the eye, given here in millimetres.
How does it handle a cylinder?
It compensates the sphere and the second meridian, S plus C, separately, takes the difference as the new cylinder and leaves the axis unchanged.
Why can a result differ by 0.01 D from a hand calculation?
Subtracting values already rounded to two decimals can differ by 0.01 D, while the tool uses exact arithmetic.
Is the result a prescription?
No. It is arithmetic only, and an eye care professional decides the lens power and fit.
Sources
Was this tool helpful?
What went wrong?
We only receive the reason you pick, never what you typed into the tool.
Thanks for your feedback.