A coffee to water ratio calculator takes the guesswork out of brewing a good cup. Tell it how much water you'll use, choose a strength, and this coffee to water ratio calculator shows how many grams of coffee you need. You can also start with the coffee you have and find out how much water to add. The tool opens in US fluid ounces, and you can switch to milliliters and grams. Once you've found a ratio that you like, you can repeat it every morning and get the same result, whatever the size of your brew.
How to use the coffee to water ratio calculator
- Choose US or Metric units.
- Choose whether you know your water or your coffee.
- Enter the amount.
- Pick a strength, or enter your own ratio.
- Press Calculate.
Coffee ratio formula
- Coffee (g) = water (L) × strength (g per liter)
- Water (L) = coffee (g) ÷ strength (g per liter)
- Ratio = 1,000 ÷ strength
What is the best coffee to water ratio?
The ratio of coffee to water is one of the key variables in coffee preparation, together with grind size, water temperature and brew time. Commonly cited targets are about 55 grams of coffee per liter of water under American standards, and up to 63 grams per liter under Norwegian standards. That works out at roughly 14 to 16 grams of coffee for a 240 milliliter cup. Expressed as a ratio, 55 grams per liter is about 1:18, and 63 grams per liter is about 1:16. Treat these as starting points, because the best ratio is the one that you enjoy.
Coffee ratio example
Suppose that you're brewing 12 fluid ounces of water, which is about 355 milliliters. At the standard strength of 55 grams per liter, you need 0.355 × 55, or about 19.5 grams of coffee. At the stronger 63 grams per liter, you need about 22.4 grams. If you have 30 grams of coffee and want the standard strength, you should use about 545 milliliters of water.
Why weigh your coffee?
A scoop of coffee can hold quite different amounts, depending on the roast and the grind. Darker roasts tend to be less dense, so a level scoop holds less. Weighing removes that variable, which makes your results much easier to repeat. A small kitchen scale that reads to a single gram is enough. Place your brewing device on the scale, add your coffee, and then pour in your water while you watch the weight rise. One gram of water is very close to one milliliter, so you can read the water on the scale directly.
How to adjust the taste
- Too weak or watery: use more coffee, or a finer grind.
- Too strong or heavy: use less coffee, or more water.
- Sour or sharp: the coffee may be under-extracted. Try a finer grind or a longer brew.
- Bitter or harsh: it may be over-extracted. Try a coarser grind or a shorter brew.
Change only one thing at a time. That way you'll know which adjustment made the difference.
Brewing methods and ratios
Different methods can favor different ratios. Espresso is far more concentrated than filter coffee. A shot made with 7 grams of grounds and 25 milliliters of water works out at about 280 grams per liter, although some of the water stays behind in the grounds. Cold brew is often made as a strong concentrate, which is later diluted with water or milk. Filter methods, such as drip machines and pour-over, tend to sit near the standard ratios on this page.
Making a large batch
The ratio stays the same, whatever the quantity. For eight people drinking 8 fluid ounces each, enter 64 fluid ounces and the calculator will give you the total amount of coffee. When you are using a large drip machine, check how much water it can hold, and leave enough room for the grounds and the filter.
Does water quality matter?
Coffee is mostly water, so what comes out of your tap affects what ends up in your cup. If your water has a strong smell or taste, a simple filter can make a noticeable improvement. Use fresh water each time rather than reheating what's left over in a kettle, and bring it to just off the boil for most filter methods. Clean your equipment regularly as well, since old coffee oils can make a good brew taste stale or bitter.
Keeping track of what works
When you find a cup that you really like, write down the amount of coffee and water, the grind setting and the brew time. Having a record makes it easy to repeat your best results, and to return to them when you open a new bag. Different coffees can taste best at slightly different ratios, so a small adjustment is normal when you change beans.
Common mistakes
- Measuring by scoops and expecting the same result.
- Counting brewed coffee as water. Some water stays in the grounds.
- Changing several things at once. Adjust one at a time.
- Using stale coffee. No ratio can fix it.
Related kitchen tools
Measure your grains with the rice water ratio calculator, adjust serving sizes with the recipe scaler, and change units with the volume converter.
What next
Use this often? Add Coffee to Wa to your Home screen.
Frequently asked questions
How does the coffee to water ratio calculator work?
It multiplies your water in liters by the strength in grams per liter to find the coffee you need.
How much coffee do I need per cup?
About 14 to 16 grams for a 240 mL cup at common strengths.
What is the golden ratio for coffee?
Commonly cited targets are about 55 to 63 grams of coffee per liter of water.
Should I weigh my coffee?
Yes, if you can. Scoops vary with the roast and the grind.
Can I enter my own ratio?
Yes. Choose Custom ratio and enter the parts of water per part of coffee.
Sources
Was this tool helpful?
What went wrong?
We only receive the reason you pick, never what you typed into the tool.
Thanks for your feedback.