Saved

Press the star next to a tool's name to save it.

All my tools

Clay Shrinkage Calculator

Use this clay shrinkage calculator to find the final length, height and width of a clay piece after drying or firing, from its original size and shrinkage percentage.

Restored your last values ·

%

Enter the size of the piece before it dries or is fired, in any unit, and the shrinkage of your clay in percent. The calculator gives the final size in the same unit. Height and width are optional.

Everything is worked out in your browser. Nothing you type is sent anywhere.

–

–

Enter the original length and the shrinkage, then press Find final size.

See full result

A clay shrinkage calculator tells you how small a clay piece will be after it dries or is fired. Enter the original length, and the height and width if you like, and the shrinkage of your clay in percent, and the calculator gives the final size. The formula is our own working, a simple percentage reduction. It runs in your browser and nothing you enter is sent anywhere.

How to use the clay shrinkage calculator

  1. Enter the original length of the piece, and the height and width if you want them.
  2. Enter the clay shrinkage in percent.
  3. Press Find final size.
  4. Read the final dimensions and the size multiplier.

Why clay shrinks

Clay shrinks as it dries, because the water in the piece has to leave before firing [3]. Metal clay shrinks in a second way: as the dry clay fires, the binders burn away and the water content evaporates, leaving sintered metal [1]. The amount of that shrinkage depends on the product used [1]. Measure the piece while it is still wet, before it dries, and use the shrinkage figure that matches the stage you want.

The formula

Each final dimension is the original dimension times one minus the shrinkage divided by 100, where the shrinkage is the number of percent, for example 14 for 14 percent. For 14 percent, the multiplier is 0.86, so a 20-centimetre piece becomes 17.2 centimetres. The same multiplier applies to every dimension, so the shape stays the same and only the scale changes. The calculator works in any unit, as long as you read the answer in the unit you used for the input.

Typical shrinkage values

For metal clays, shrinkage of between 8 and 30 percent occurs, depending on the product used [1]. Examples given there include 10 to 11 percent for EZ960 Sterling, 10 to 20 percent for PMC Sterling and about 8 to 10 percent for Art Clay Silver [1]. Ordinary pottery clays and air-dry clays vary too, so we give no single figure for them. Use the value from the maker of your clay, because it depends on the material.

Worked example

Suppose a piece of clay measures 10 by 12 by 15 inches and shrinks by 10 percent when it dries. The shrinkage is 10 percent, so the multiplier is 0.9, and the final size is 9 by 10.8 by 13.5 inches. Enter 15, 12 and 10 with a shrinkage of 10 to see the same result in the calculator. If you want to make a piece of a given final size, remember that you must start with a larger one. Divide the final size you want by the multiplier to find the starting size.

Reducing shrinkage

Grog is a material that reduces shrinkage and aids even drying, and it helps prevent cracking when the piece is worked and when it dries [2]. In pottery, coarser particles in the clay also restrain shrinkage during drying [3]. Potters add grog to their clay for large pieces and for sculpture for this reason, because less shrinkage means fewer cracks.

Reading the result

The calculator shows the final length and, if you entered them, the final height and width, together with the size multiplier. The multiplier is the number to multiply any measurement by, so you can use it to check other parts of your design without typing them in. A multiplier of 0.9 means that every dimension becomes 90 percent of its original size, and a multiplier of 0.86 means 86 percent.

Planning a piece that must fit

If a piece has to fit something, such as a lid on a pot or a ring on a finger, you need to start bigger. Divide the final size by the multiplier to find the starting size. For a lid that must be 10 centimetres across after drying and firing, with a shrinkage of 12 percent, the multiplier is 0.88, and the lid must be 11.4 centimetres wide when it is wet. Always make a test piece, because clays from different batches can differ a little.

Drying evenly

Uneven shrinkage and cracking often plague drying in ambient air [3], and the shrinkage then differs from place to place. Dry pieces slowly, away from direct heat and draughts, and turn them from time to time. Thick and thin parts dry at different speeds, so try to keep the thickness even. With air-dry clay, a covered, slow drying gives the best results.

Different stages of shrinkage

A clay piece can shrink in more than one stage. Most of the change happens as the water leaves while the piece dries, and some clays and all metal clays shrink further when they are fired. Metal clay loses water and binder as it fires [1], so the stages overlap. Use the figure your clay maker gives for the stage you care about. If you want to know both stages, run the calculator twice, using the result of the first run as the input of the second.

Common mistakes

  • Using the dry size as the original. Measure while the clay is wet.
  • Entering 0.14 instead of 14. Enter the percentage as a number.
  • Using one figure for all clays. Check the label.
  • Forgetting that the piece must start bigger. Divide the target size by the multiplier.

What next

Use this often? Add Clay Shrinka to your Home screen.

Frequently asked questions

What is a clay shrinkage calculator?

A tool that gives the final size of a clay piece after it dries or is fired, from its original size and shrinkage.

How do you calculate clay shrinkage?

Final size = original size times (1 minus the shrinkage percent divided by 100).

How much does clay shrink?

It depends on the clay. Metal clays shrink between 8 and 30 percent depending on the product, and other clays vary, so use the maker's figure.

How big will a 10 by 12 by 15 inch piece be with 10 percent shrinkage?

With 10 percent shrinkage, 9 by 10.8 by 13.5 inches.

What reduces clay shrinkage?

Grog, which is fired clay that has been ground up.

What went wrong?

We only receive the reason you pick, never what you typed into the tool.

Thanks for your feedback.

More Fun & Lifestyle Tools