A CBM calculator works out the volume of a shipment in cubic metres, the figure that freight forwarders use to charge for sea freight and to book space. Enter the size of one carton, in inches or centimetres, and how many cartons there are. You get the volume of one carton, the total volume in cubic metres and cubic feet, and the number of 20 ft, 40 ft and 40 ft high cube containers that it needs by volume and weight. It runs in your browser.
How to use the CBM calculator
- Choose US or Metric units.
- Enter the length, width and height of one carton.
- Enter the number of cartons, and the weight of one carton if you want a weight check.
- Press Calculate.
What a CBM is
CBM stands for cubic metre, the SI unit of volume. One cubic metre is 1,000 litres [2], and it is also about 35.3146667 cubic feet and about 1.3079506 cubic yards. In freight, the CBM of a carton is its length times its width times its height in metres. A carton of 50 × 40 × 30 cm is 0.5 × 0.4 × 0.3 = 0.06 CBM, and 100 of them are 6 CBM, or 211.9 cubic feet. The calculator converts from inches by using 2.54 cm to the inch.
Container sizes
Standard shipping containers come in a few set sizes. A 20 ft container is 20 feet (6.1 m) long, 8 feet (2.44 m) wide and 8 and a half feet (2.6 m) high on the outside, with an internal volume of 1,172 cubic feet, or 33.2 cubic metres. A 40 ft container has an internal volume of 2,389 cubic feet, or 67.6 cubic metres, and a 40 ft high cube, which is a foot taller at 9 and a half feet (2.9 m), has 2,694 cubic feet, or 76.3 cubic metres.[1] The calculator uses these internal volumes to count containers. For example, 60 CBM is more than a 20 ft container holds, so it takes three of them, or two 40 ft containers, or one 40 ft high cube.
Why the usable share matters
You cannot fill the whole internal volume with cartons. There are gaps between the cartons, around the doors and at the top, and pallets use space. A common rule of thumb for floor-loaded cartons is that 80 to 90 percent can be used, and the calculator uses 85 percent unless you change it. This is a rule of thumb, and it is not given on the pages. With 85 percent, a 20 ft container takes about 28 CBM, a 40 ft about 57.5 CBM and a 40 ft high cube about 64.9 CBM. If your cartons fit the container well, enter a higher share.
Weight limits
A container can also be full by weight before it is full by volume. The maximum gross mass of a 20 ft dry cargo container is 24,000 kg, which leaves about 21,600 kg of cargo, and that for a 40 ft dry cargo container, including the high cube, the gross mass is 30,480 kg and the cargo capacity is 26,500 kg.[1] If you enter the weight of a carton, the calculator compares the total weight with these limits and tells you when weight, not volume, decides the number of containers. Dense goods such as tiles, books and metal parts reach the weight limit first.
A worked example
You ship 1,000 cartons of 50 × 40 × 30 cm that weigh 20 kg each. The volume is 60 CBM and the weight is 20,000 kg. By volume, with 85 percent usable, that needs 3 containers of 20 ft, 2 of 40 ft or 1 of 40 ft high cube. By weight, a 20 ft container holds 21,600 kg, so the weight needs 1 container. The volume decides, and the cheapest choice may be the 40 ft high cube. If each carton weighed 100 kg, the weight of 100,000 kg would need 5 containers of 20 ft or 4 of 40 ft, so weight would decide.
LCL and FCL shipping
If your cargo does not fill a container, you can ship it as a less-than-container load, LCL, and pay by the CBM, with a minimum of often 1 CBM, or by weight, whichever the carrier counts as larger. If it fills a container, a full container load, FCL, usually costs less per cubic metre. The calculator shows how much of each container your cargo fills, so you can compare the two. Ask your forwarder for the rate that applies and for their rule for converting weight to volume, which is often 1,000 kg to 1 CBM for sea freight.
Planning a shipment
Start with the packed size of one carton and the total number of cartons. Work out the CBM and the weight, and compare them with the three container sizes. If the cargo is just over a container, you may save money by cutting the number of cartons, by repacking into smaller cartons or by switching to the next size. Check the loading rules of your carrier, because some limit the height of a stack or the weight of a pallet. The calculator is a quick planning aid, and your forwarder gives the final quote and the booking.
Common mistakes
- Measuring the product and not the carton. Use the outside size of the packed carton.
- Mixing centimeters and inches. Choose the units first.
- Ignoring the weight. Heavy cargo fills the weight limit before the space.
- Using the full internal volume. Real loads leave some space.
What next
Use this often? Add CBM to your Home screen.
Frequently asked questions
What is a CBM calculator?
A tool that finds the volume of cartons or a shipment in cubic metres, and how many shipping containers it needs.
How do I calculate CBM?
Multiply the length, width and height of the carton in metres, then multiply by the number of cartons. 50 × 40 × 30 cm is 0.06 CBM.
How many CBM are in a 20 ft and a 40 ft container?
About 33.2 CBM in a 20 ft, 67.6 in a 40 ft and 76.3 in a 40 ft high cube, by internal volume.
Why do I use an 85 percent usable share?
Gaps between cartons and at the doors mean that you cannot fill the whole volume. 85 percent is a rule of thumb that you can change.
When does weight decide the number of containers?
For dense goods. A 20 ft container carries about 21,600 kg and a 40 ft about 26,500 kg, so heavy cartons fill the weight limit before the space.
Was this tool helpful?
What went wrong?
We only receive the reason you pick, never what you typed into the tool.
Thanks for your feedback.