This cake pan calculator tells you how to adjust a recipe when you bake it in a different pan. Enter the pan the recipe calls for and the pan you want to use, round, square or rectangular, and the cake pan calculator compares their areas and tells you what to multiply the recipe by, or whether you can swap them straight away.
How to use the cake pan calculator
- Choose inches or centimeters.
- Enter the pan in the recipe: its shape and size.
- Enter the pan you want to use, and how many of them.
- Press Calculate.
Comparing pans by area
King Arthur Baking explains that the easiest way to compare pans is by area. For a square or rectangular pan, multiply one side by the other: an 8-inch square pan is 8 × 8 = 64 square inches. For a round pan, square the radius, half the diameter, and multiply by pi, about 3.14: a 9-inch round pan is 4.5 × 4.5 × 3.14 = about 63.6 square inches. So an 8-inch square and a 9-inch round hold about the same amount and can be swapped in any recipe.
Scaling a recipe
When the new pan is bigger or smaller, scale the recipe by the ratio of the areas: the new pan's area divided by the original pan's area. If the new pan has twice the area, make twice the batter. This keeps the batter the same depth, so the cake bakes in a similar way. The method assumes both pans are about 2 inches deep; King Arthur notes that cakes need the room a 2-inch-deep pan provides, so measure your pans to be sure.
Worked example
Say a recipe calls for a 9-inch round pan and you want to use a 9 × 13-inch pan. The round pan is about 63.6 square inches and the rectangle 117, so multiply the recipe by about 1.84. Going the other way, if a recipe is for a 9 × 13 pan and you have two 9-inch rounds, their combined area is about 127.2 square inches, about 9% more, so the original recipe will fit with batter a little shallower. An 8-inch square in place of a 9-inch round is close enough to swap without changing the recipe.
Using more than one pan
If the recipe makes a layer cake in two pans, or you want to split one cake into two smaller pans, choose the number of new pans. The calculator multiplies the new pan's area by that number before comparing. King Arthur notes, for example, that two 8-inch rounds fall about 9% short of a 9 × 13 pan, so a high-rising batter could overflow them; two 9-inch rounds, with about 10% more space, are the safer choice.
Baking time
A pan of a different shape or size can change the baking time, even when the batter is the same depth. Start checking a few minutes before the recipe's time and use the recipe's test for doneness, such as a toothpick coming out clean.
Reading the results
The big number is what to multiply the recipe by. The table shows the area of each pan and how much more or less the new pan holds; if the difference is under about 5%, the pans are close enough to swap.
Working in centimeters
If your pans are measured in centimeters, choose metric and enter the sizes in centimeters. The calculator works out the areas in square centimeters and gives the same multiplier, since the ratio of two areas doesn't depend on the unit. A 23 cm round pan, for example, is about 415 square centimeters, close to a 20 cm square at 400.
Scaling the ingredients
When you multiply a recipe, multiply every ingredient by the same factor, including eggs, leavening and flavorings. With eggs, round to the nearest whole egg, or beat an egg and use part of it by weight. If the factor is awkward, such as 1.84, rounding it to a simpler number like 1.75 or 2 and adjusting the batter depth slightly is often fine for cakes and bars.
Choosing a substitute pan
If you don't have the pan a recipe calls for, look for one with a similar area and depth. Try a few of your pans in the calculator and choose the one with the smallest difference. A difference of under about 5% means the pans are close enough to swap without changing the recipe; a bit more or less batter depth in that range rarely matters.
Very different shapes
Some pans, such as Bundt and tube pans, don't fit the simple area method, because their depth and center tube change how the batter bakes. For those, compare volumes instead, or follow a recipe written for that pan.
Common mistakes
- Comparing diameters instead of areas. A 10-inch round holds over 50% more than an 8-inch round.
- Ignoring depth. The method assumes pans of similar depth.
- Overfilling. Leave room for the batter to rise.
- Keeping the same time. Check doneness early.
Tips
- Measure pans across the inside top edge.
- Scale every ingredient by the same factor.
- Write the factor on the recipe for next time.
What next
Use this often? Add Cake Pans to your Home screen.
Frequently asked questions
How does a cake pan calculator work?
It compares the areas of the two pans and multiplies the recipe by the new area ÷ the original area.
Can I use an 8-inch square pan instead of a 9-inch round?
Yes. Both hold about 64 square inches.
How do I convert a 9-inch round recipe to a 9×13 pan?
Multiply the recipe by about 1.84.
How do I work out the area of a round pan?
Square the radius and multiply by pi: a 9-inch round is about 63.6 square inches.
Does a different pan change baking time?
It can; start checking early.
Was this tool helpful?
What went wrong?
We only receive the reason you pick, never what you typed into the tool.
Thanks for your feedback.