Saved

Press the star next to a tool's name to save it.

All my tools

Boat Speed Calculator

Use this boat speed calculator to find the hull speed of a displacement boat from its waterline length, and the speed–length ratio and Froude number of a given speed.

Restored your last values ·

Choose US or metric units. Enter the length at the waterline to get the hull speed. Or add a boat speed to get the speed–length ratio and the Froude number.

Everything is worked out in your browser. Nothing you type is sent anywhere.

–

–

Enter the waterline length, then press Calculate.

See full result

A boat speed calculator gives the hull speed of a displacement boat from the length at its waterline, together with the speed–length ratio and the Froude number of any speed you enter. Use it to see how fast a sailboat or a slow motorboat can go before the wave it makes holds it back.

How to use the boat speed calculator

  1. Choose US or metric units.
  2. Enter the waterline length.
  3. Optionally enter a boat speed in knots to get the ratios.
  4. Press Calculate.

The hull speed formula

The page gives the hull speed as about 1.34 times the square root of the waterline length, with the length in feet and the speed in knots [1]. It notes that 1.34 is not a dimensionless constant [1]. If the length is in metres and the speed in knots, the coefficient is 2.43 [1]. For a boat 33 feet long at the waterline the hull speed is 7.7 knots, and for one 10 metres long it is also about 7.7 knots [1].

The range of the coefficient

The page gives a range for the coefficient of 1.34 to 1.51 in knots per root foot, which is 4.50 to 5.07 in kilometres per hour per root metre [1]. The calculator uses 1.34 for its main answer and shows the whole range in the note. Different authors use different values, so the result is best read as an approximate speed that a boat of that length reaches with ease, and not an exact limit.

Speed–length ratio

The ratio of speed to the square root of the waterline length is often called the speed/length ratio, even though it is a ratio of speed to the square root of length [1]. With speed in knots and length in feet, hull speed corresponds to a ratio of 1.34. Froude's original speed–length ratio was defined in the same way, as speed divided by the root of the waterline length [2]. The calculator shows it for any speed that you enter.

The Froude number

The Froude number is Fr = u ÷ √(g L), where u is the speed, g the acceleration of gravity and L the length, in this case the waterline length [2]. It is a dimensionless number that compares the speed with the speed of a wave of the same length. The page on hull speed links a Froude number of about 0.35 to a speed–length ratio just under 1.20, and about 0.40 to a ratio of about 1.35 [1]. The calculator uses g = 9.81 metres per second squared.

A worked example

A boat 10 metres long at the waterline has a hull speed of 7.7 knots by the metric formula, which is 3.96 metres per second. Its Froude number at that speed is 3.96 ÷ √(9.81 × 10), about 0.40, which agrees with the page. At 6 knots its ratio is 1.05 in knots per root foot, below the hull speed range, so it is well within displacement mode. These are our own calculations.

What happens at hull speed

A displacement hull makes a wave pattern, and the length of the wave grows with speed. At hull speed the wave is as long as the hull, so the boat sits between a crest at the bow and a crest at the stern and the wave resistance rises steeply. Pushing a heavy hull faster needs far more power. A light hull can climb onto its own wave and plane, which is how speedboats exceed their hull speed.

A word of caution

The page states that the concept of hull speed is not used in modern naval architecture [1]. Designers use the Froude number and the wave resistance curve for a hull instead. The calculator is a guide for sailors and boat buyers, who still quote hull speed to compare boats. Slender hulls, multihulls and boats that can plane do not follow the rule.

Using the results

Compare the hull speed with the speed you want to cruise at. A boat whose hull speed is below your target will be slow and use a lot of fuel when pushed. Use the speed–length ratio to see where the boat sits: below 1 it is slow and efficient, around 1.34 it reaches hull speed, and above 1.5 it is being pushed beyond the displacement range.

Planning a passage

For a passage plan, use the hull speed as an upper bound on the average speed in light airs, and a fraction of it for a realistic estimate. A 33-foot boat with a hull speed of 7.7 knots might average 5 to 6 knots over a long trip, so 120 nautical miles takes about 20 to 24 hours. These are our own planning figures, and the real speed depends on the wind and sea.

Converting speeds

One knot is one nautical mile per hour, which is 1.852 kilometres per hour or about 1.15 miles per hour. The calculator shows all three, so that you can compare with a car speedometer or a chart.

Common mistakes

  • Using the overall length. Use the length at the waterline.
  • Mixing the knots and mph. The result is in knots with conversions.
  • Applying it to planing hulls. They can go faster than hull speed.
  • Treating it as a precise limit. It is a rule of thumb.

What next

Use this often? Add Boat Speed to your Home screen.

Frequently asked questions

What is a boat speed calculator?

A tool that finds the hull speed of a displacement boat from its length at the waterline.

What is the hull speed formula?

About 1.34 × √LWL in knots, with the length in feet, or 2.43 × √LWL with the length in metres.

What is the speed–length ratio?

The speed in knots divided by the square root of the waterline length in feet.

What is the Froude number?

u ÷ √(g L): the speed divided by the speed of a wave of the waterline length.

Can a boat go faster than its hull speed?

Planing and light boats can. For a displacement hull the power needed rises steeply.

What went wrong?

We only receive the reason you pick, never what you typed into the tool.

Thanks for your feedback.

More Unit Converters