A bench press pyramid calculator builds a pyramid of sets from your one-rep max. Enter your 1RM, choose how many sets you want and which kind of pyramid, and the calculator gives the percentage and the weight for each set. The weight of a set is your 1RM times the percentage of the set, in the same way that research expresses an exercise load as a percentage of the 1RM, the relative load. [2] It runs in your browser.
How to use the bench press pyramid calculator
- Choose pounds or kilograms.
- Choose the pyramid type: ascending, descending, full or full reverse.
- Enter your one-rep max and the number of sets, from 2 to 9.
- Check the start and peak percentages, and press Build the pyramid.
What a pyramid is
Pyramid sets increase or decrease the load with each set. [1] In an ascending pyramid, the load increases with each set, so that you finish with the heaviest set. In a descending pyramid, the load decreases with each set. A full pyramid goes up and then comes down again, and a full reverse pyramid goes heavy, then lighter, then heavy again. [1] The Brookbush Institute notes that a review of the evidence found pyramid sets likely to improve outcomes less than conventional set strategies, so treat a pyramid as one option and not as a requirement. [1]
The rule for each set
You work out the weight of a set by multiplying your 1RM by the percentage of that set. For a plan, we suggest starting at 50 to 60% of your 1RM, and adding 5 to 15 percentage points for each set until you reach the peak that you want. The peak set is usually 80 to 100% of your 1RM, depending on the type, the number of sets and your goals. These starting and peak values are our own planning defaults, not a published standard. The calculator spaces the percentages evenly from the start to the peak, and rounds each one to the nearest 5%.
A worked example
As an example, take a lifter with a 1RM of 95 kilograms who does a descending pyramid of three sets. The first set is at 85%, which is 80.8 kilograms. The second set is at 70%, which is 66.5 kilograms, and the third is at 60%, which is 57 kilograms. With a start of 60% and a peak of 85%, the calculator gives these percentages and weights. It does not choose the repetitions for you.
How the percentages are chosen
This tool picks the percentages for each type and number of sets with a simple method. For an ascending pyramid it divides the range from the start to the peak into equal steps, and for a descending pyramid it reverses them. For a full pyramid it goes up to the peak in the middle and comes down again, and a full reverse pyramid is the opposite. Each percentage is rounded to the nearest 5%, and a half goes down, so 72.5% becomes 70%. You can change the start, the peak and the number of sets to get another shape.
Your one-rep max
The one-rep max is the heaviest weight that you can lift once with good form. If you do not know it, you can test it with a spotter, or estimate it from a set of several repetitions with the one-rep max calculator on this site. The weight of the bar counts as part of the total, and a barbell for men in weightlifting competition weighs 20 kilograms, which is 44 pounds, while a women's barbell is 15 kilograms, which is 33 pounds, although some meets let women choose either one. [3] Use a 1RM that includes the bar, and use the weights of the result as the total on the bar.
Safety
Heavy sets of the bench press are risky, and a spotter or safety arms in a rack are important. Actual one-rep max testing may be contraindicated for people with no previous lifting experience. [4] Use a spotter or safety arms in a rack when you test, and warm up first (our own advice). Warm up with light sets before the first set of the pyramid. If your 1RM is old, test it again before you plan with it, since it changes with training. Stop a set if the bar slows a lot or your form breaks down.
An example with other settings
For a 1RM of 200 pounds, an ascending pyramid of four sets from 50% to 90% gives 100, 130, 150 and 180 pounds, since the percentages are 50, 65, 75 and 90 after rounding. A full pyramid of five sets from 60% to 85% gives 60, 70, 85, 70 and 60%, which for the same 1RM is 120, 140, 170, 140 and 120 pounds. Try your own numbers, and choose weights that you can load with the plates that you have, rounding to the nearest plate.
Choosing the number of sets
More sets give a gentler climb between the start and the peak, while fewer sets make larger jumps in weight. Three to five sets suit most sessions, and the calculator allows from two to nine so that you can try different shapes. Whatever you choose, rest long enough between heavy sets that the bar speed stays steady, and write down the weights that you used so that you can compare one session with the next.
Common mistakes
- Using an old 1RM. Test it again, or estimate it from a recent set.
- Forgetting the bar. The 1RM and the weights include it.
- Starting too heavy. A first set at 50 to 60% is a sensible start.
- Skipping the warm-up. The first set is not a warm-up.
What next
Use this often? Add Bench Press to your Home screen.
Frequently asked questions
What is a bench press pyramid calculator?
A tool that builds the sets of a pyramid from your one-rep max, giving the percentage and the weight of each set.
How is the weight of a set worked out?
It is your one-rep max times the percentage of the set.
Where should a pyramid start and peak?
This calculator suggests starting at 50 to 60% of your 1RM, adding 5 to 15 percentage points a set, and peaking at 80 to 100%. These are planning defaults, not a standard.
What is a worked example?
A 1RM of 95 kg in a descending pyramid of 3 sets: 85% = 80.8 kg, 70% = 66.5 kg and 60% = 57 kg.
Does the weight include the bar?
Yes. Use a 1RM that includes the bar. A men's competition bar weighs 20 kg, or 44 lb.
Sources
- Brookbush Institute: Pyramid sets
- PMC: Maximal Number of Repetitions at Percentages of the One Repetition Maximum
- USA Weightlifting: Competition Category Policy Implementation Guide (barbell selection)
- PMC: Reliability of 1-Repetition Maximum Estimation in Untrained Middle Aged Type 2 Diabetic Patients
Was this tool helpful?
What went wrong?
We only receive the reason you pick, never what you typed into the tool.
Thanks for your feedback.