A basic calculator does the four everyday jobs: add, subtract, multiply and divide. This one is the classic desk calculator on your screen, with a memory, a key that brings back your last answer and a key for numbers like 5 × 10^3. Tap the keys or type on your keyboard, and the screen shows your sum as you build it.
How to use this basic calculator
Press the number keys to enter a number, then an operator key (+, −, ×, ÷), then the next number, and finish with the = key. The line above the big number shows the sum so far, so you can see what you typed. Press = and your answer appears in the result panel too, with your last five sums listed underneath so you can check them again.
After an answer you can carry straight on. Press an operator key and the answer becomes the first number of your next sum. Press a digit instead and you start a new sum. If you press the wrong operator, press the right one straight away and it replaces the first. The Back key removes the last digit you typed, and AC clears the whole sum.
The keys, one by one
- 0–9 and the decimal point. A number can hold up to 15 digits.
- + − × ÷. The four operations.
- ±. Changes the number on the screen between positive and negative.
- Back. Deletes the last digit you typed.
- AC. Clears the screen and the sum. Your memory stays, so you do not lose a stored number by mistake.
- Ans. Types in your last answer, so you can reuse it in a new sum.
- EXP. Lets you enter a power of ten. Press 5, then EXP, then 3, and you have 5 × 10^3, which is 5,000. It is handy for very large and very small numbers.
- RND. Types in a random number between 0 and 1, with up to six decimal places.
- M+, M− and MR. Add the number on the screen to the memory, take it away from the memory, or bring the memory back to the screen. A small line under the screen shows what is stored, with a link to clear it.
Order of operations
This calculator follows the usual order of operations. Multiplication and division are done before addition and subtraction, and operations at the same level are done from left to right. So 2 + 3 × 4 gives 14, not 20, because the 3 × 4 is worked out first. The same convention gives 1 + 2 × 3 = 7 in the Wikipedia article on the order of operations [1].
Not every calculator does this. The same Wikipedia article explains that simple calculators without a stack use chain input, where each operation is done in the order you press the keys, so 1 + 2 × 3 = gives 9 on them. If you have a handheld calculator that answers differently from this page, that is the likely reason. This basic calculator has no bracket keys, so when you need brackets or powers, use the scientific calculator, which accepts whole expressions.
Worked examples
2 + 3 × 4 = 14
10 − 4 − 3 = 3 (left to right)
8 ÷ 2 × 4 = 16
0.1 + 0.2 = 0.3
5 EXP 3 = 5 × 10^3 = 5,000
To work out a shopping total, key in each price with the plus key, then press =. To split a bill, press the total, the ÷ key and the number of people. To keep a running total across several sums, press M+ after each answer and MR at the end to see the grand total.
Using the memory
The memory works like the memory on a handheld calculator. Work out a sum, press = and then M+ to store the answer. Work out a second sum and press M+ again to add it to the first. Press M− to subtract the number on the screen instead. MR brings the stored total back, ready to use in a new sum, and you can clear it with the link under the screen. Because AC leaves the memory alone, you can clear a sum without losing your running total.
How accurate is it?
The calculator rounds each answer to 12 significant digits. That hides the tiny errors that computers can produce with decimals, so 0.1 + 0.2 shows 0.3 as you would expect. Answers that are too large or too small to show in full appear as a power of ten, for example 1.5 × 10^20. If you divide by zero the screen shows Error and a message, and the next key you press starts afresh.
Keyboard shortcuts
On a computer you can type instead of tapping. The number keys and the decimal point enter numbers, the +, −, * and / keys do the four operations, and Enter or = gives the answer. Backspace removes the last digit, and Escape or Delete clears the sum. The shortcuts work whenever you are not typing in another box on the page.
Common mistakes
The most common surprise is the order of operations. If you type 2 + 3 × 4 and expect 20, remember that the multiplication happens first, and add the sum in two steps if you want 20: press 2 + 3 =, then × 4 =. Another is forgetting that the decimal point counts towards nothing but a number can hold only one. If an answer looks wrong, check the line above the screen: it lists every number and operator the calculator has taken in.
Your sums stay in your browser. Nothing you type is sent anywhere, and the calculator keeps only your last five answers on the page until you leave it.
What next
Use this often? Add Basic to your Home screen.
Frequently asked questions
What is a basic calculator?
A basic calculator does addition, subtraction, multiplication and division, and usually has a memory and a way to change a number's sign. It is the classic four-function calculator, without brackets, powers or trigonometry.
Does this basic calculator follow the order of operations?
Yes. Multiplication and division are done before addition and subtraction, and equal operations go left to right, so 2 + 3 × 4 gives 14. Simple calculators that use chain input would give 20.
How do I use the memory keys?
Press M+ to add the number on the screen to the memory and M− to subtract it. MR brings the stored number back to the screen. AC does not clear the memory, so use the clear link under the screen when you want to empty it.
What does the EXP key do?
EXP lets you type a power of ten. Press 5, EXP and 3 to enter 5 × 10^3, which is 5,000. It is useful for very large and very small numbers.
Can I use my keyboard with this calculator?
Yes. Type the digits, a decimal point and the + − * / keys, press Enter or = for the answer, Backspace to delete a digit and Escape to clear. The shortcuts work unless you are typing in another box on the page.
Where can I do brackets, powers or percentages?
Use the scientific calculator, which accepts whole expressions with brackets, powers, roots and trigonometry. For percentages, the percentage calculator works them out for you.
Sources
Was this tool helpful?
What went wrong?
We only receive the reason you pick, never what you typed into the tool.
Thanks for your feedback.