A baking time calculator helps when your oven or your pan isn't the one that a recipe had in mind. Most recipes are written for a traditional oven and for one particular pan. Enter the recipe's temperature and time, say what's different, and this baking time calculator suggests new settings and tells you when to start checking. You can adjust for a convection oven by lowering the temperature or shortening the time, or compare two pans to see how the batter depth will change. It gives you a sensible place to begin, and your eyes and a toothpick do the rest.
How to use the baking time calculator
- Choose Convection oven or Pan size.
- Choose °F or °C.
- Enter the recipe's temperature and time.
- Choose how to adjust, or enter both pan sizes.
- Press Calculate.
Adjusting for a convection oven
Convection cooking uses a fan to circulate hot air evenly throughout the oven. Unless a recipe says otherwise, it's written for a traditional oven, and it must be adjusted to avoid overcooking and burning the food. Food Republic gives this rule: either lower the temperature by 25 degrees, or reduce the original cooking time by 25%.
| Food | Suggested change |
|---|---|
| Baked goods that are in the oven briefly | Lower the temperature by 25 °F |
| Foods that cook for longer, such as stews or roasted meats | Reduce the time by 25% |
Some ovens have an auto-adjust feature, so check the owner's manual before you make any changes. If your oven adjusts by itself, a further change could leave the food undercooked.
A worked example
Your cookie recipe says 350 °F for 40 minutes, and you have a convection oven. If you lower the temperature, you'd bake at 325 °F for 40 minutes. Because convection works faster, start checking at around 30 minutes. For a stew that's meant to cook for an hour, you could keep the temperature and reduce the time to 45 minutes. Food Republic gives this same example, and suggests that you begin checking after 45 minutes.
Changing the pan size
Food Network's first rule for changing pans is to keep the depth of the batter the same. Too much batter, and a cake could sink in the middle or overflow. Too little, and you could end up with a thin, shallow and dry cake, because the moisture evaporates too quickly. It suggests filling the pan about halfway to two-thirds full, and baking any leftover batter in muffin tins or a small dish.
To keep the depth the same, scale your ingredients by the area of your pan divided by the area of the recipe's pan. This tool calculates that for you and shows it as a multiplier.
Keeping the same amount of batter
If you'd rather not scale the recipe, you can adjust the temperature and time instead. When you move to a smaller pan and the batter seems too deep, bake low and slow by lowering the oven temperature by 25 °F and increasing the baking time. For a larger pan, raise the temperature by 25 °F and decrease the baking time.
A pan size example
A recipe calls for a 9-inch round pan at 350 °F for 30 minutes, but you only have an 8-inch round pan. The 9-inch pan has an area of about 63.6 square inches, and the 8-inch pan has about 50.3, so the ratio is 0.79. To keep the same depth, you'd use 79% of the ingredients. If you use all of the batter instead, it will be deeper, so bake at 325 °F and expect it to take longer than 30 minutes.
How to tell when it's done
- Cakes: a toothpick inserted in the center should come out clean, and the top should spring back when pressed.
- Cookies: look for set edges and a light golden color.
- Breads: use a thermometer or follow your recipe's cue.
- Roasted meats: always use a thermometer, and don't rely on time alone.
Getting consistent results
Oven dials aren't always accurate, so an inexpensive oven thermometer can help. Avoid opening the door more than you need to, since every look lets out heat. Place your pan on the middle rack unless the recipe says otherwise, and leave room around it so that air can move. Write down what worked, and you'll have your own tested settings for next time.
Other things that affect baking time
Pan material also plays a part. Dark metal pans can brown food faster than light ones, and glass heats differently from metal, so keep a close eye on the first attempt in a new pan. Cold ingredients may also lengthen the time a little.
Common mistakes
- Making both changes at once. Pick either temperature or time.
- Overfilling the pan. Stay at two-thirds full or below.
- Setting a timer and walking away. Start checking early.
Related cooking tools
Convert a dial with the oven temperature converter, resize a recipe with the recipe scaler, and measure ingredients with the cups to grams converter.
What next
Use this often? Add Baking Time to your Home screen.
Frequently asked questions
How does the baking time calculator work?
It applies common kitchen rules for convection ovens and compares the area of two pans.
How do I convert a recipe for a convection oven?
Lower the temperature by 25 °F, or reduce the time by 25%. Don't do both.
How do I change the size of a cake pan?
Scale the ingredients by the ratio of the two pan areas, so that the batter stays at the same depth.
How full should a cake pan be?
About halfway to two-thirds full, according to Food Network.
Is the time exact?
No. Ovens vary, so begin checking early and judge by how the food looks.
Sources
Was this tool helpful?
What went wrong?
We only receive the reason you pick, never what you typed into the tool.
Thanks for your feedback.