An ARV calculator finds the after repair value of a property, which is what it should be worth once the repairs are done, and the most that a house flipper might bid for it. Enter the current value and what the renovations add, or the price per area, and the repair costs, and the calculator gives the ARV, a suggested bid and the profit. It uses the standard flipper formula for the maximum offer, the 70 percent rule.[1] It runs in your browser and nothing you enter is sent anywhere.
How to use the ARV calculator
- Choose how to find the ARV.
- Enter the current value and the value of the renovations, or the price per area and the area.
- Enter the repair cost, or the cost per area and the area to repair, and the purchase rule if it is not 70 percent.
- Press Work out the ARV.
The two ways to find the ARV
The ARV is the projected market value of the property once renovations are complete, usually based on recent comparable sales.[1] There are two common ways to estimate it, and both are our own working. In the first, the ARV is the current value of the property plus the value of the renovations. In the second, it is the average price per square foot, or per square metre, times the area of the property. The second method is only an average price per area, so it is only as good as the average that you enter. Use prices of similar properties that have recently sold in the same area.
The 70 percent rule
The suggested bid is the ARV times 70 percent, minus the repair costs. This is the 70 percent rule, also called the maximum allowable offer: an investor should not offer more than 70 percent of the ARV minus the estimated repair costs.[1] The remaining 30 percent is meant to cover holding costs, selling costs, financing costs and profit, so it is not all profit.[1] The rule is a starting guideline, not a fixed requirement.[1] You can change the percentage in the calculator, for example if you know your own costs are lower.
Repair costs
The total repair cost can be entered directly, or found from the repair cost per unit of area times the area that needs repair. For example, repairs of 50 per square foot over 500 square feet cost 25,000. The cost of repairs is the figure that is hardest to know, so get quotes from contractors and add a margin for surprises.
Worked example
The calculator's example is a property with a current value of 100,000 and renovations that add 50,000, so the ARV is 150,000. The same result comes from a price of 150 per square foot for 1,000 square feet. With repair costs of 25,000, the suggested bid is 150,000 times 0.7 minus 25,000, which is 80,000. The profit is the ARV minus the bid minus the repairs, which is 45,000. Divided by the ARV, that is a return of 30 percent. Divided by the money that the investor puts in, which is the bid plus the repairs, the same profit would be about 43 percent.
What the calculator leaves out
The 70 percent formula does not choose comparable properties, use market data or itemize holding costs, and the calculator does not include them. Renovations often uncover more problems once work begins, which can cost a lot more than planned, and flipping does not guarantee a profit.[2] A real project has interest on a loan, taxes, insurance, utilities and agent fees, which can be large. Treat the suggested bid as an upper limit, and work out the numbers again with your own costs. Our rental property and loan calculators can help with these.
Reading the result
The calculator shows the ARV, the repair costs, the suggested maximum bid, the profit and the profit as a share of the ARV. The bid is the most the rule says you should pay for the property today. If the asking price is above the bid, the deal leaves less than the margin the rule asks for. The profit shown is the ARV less the bid and the repairs, so it is the margin that the rule leaves for costs and profit.
Choosing the rule percentage
A lower percentage, such as 65 or 60, leaves a bigger margin and is safer, but fewer deals will pass. A higher one, such as 75, suits investors with low costs and a good record. Treat 70 percent as a first filter, not a final offer.[1] Try several percentages in the calculator to see how much the bid changes: each five points of the rule changes the bid by five percent of the ARV.
Checking the ARV
The ARV is only an estimate, and a mistake in it is passed on to the bid. Look at several recent sales of similar properties in the same neighbourhood, with the same size and condition once repaired, and ask a local agent or an appraiser for an opinion. If your estimate is much higher than the prices of similar sold properties, reduce it.
Common mistakes
- Overstating the value added. Renovations rarely add more than they cost in a weak market.
- Using the wrong price per area. Use recent sales of similar properties.
- Forgetting selling costs. The 70 percent rule is meant to cover them.
- Underestimating repairs. Add a margin for surprises.
What next
Use this often? Add ARV to your Home screen.
Frequently asked questions
What is an ARV calculator?
A tool that finds the after repair value of a property and a suggested maximum bid for a flip.
What is the ARV formula?
ARV = current value + value of the renovations, or price per area × area.
What is the 70 percent rule?
Do not pay more than 70 percent of the ARV minus the cost of repairs. It is a starting guideline, not a fixed rule, so you can adjust it.
What is the bid in the calculator's example?
150,000 × 0.7 − 25,000 = 80,000.
Does the calculator include holding and selling costs?
No. The 70 percent margin is meant to cover them, but you should check your own costs.
Was this tool helpful?
What went wrong?
We only receive the reason you pick, never what you typed into the tool.
Thanks for your feedback.