Saved

Press the star next to a tool's name to save it.

All my tools

8th Pay Commission Salary and DA Calculator

Use this 8th pay commission calculator to test your pay under a fitment factor you choose, with today's 63% dearness allowance, and see the change in rupees and percent.

Restored your last values ·

INR
%
%

Enter your current basic pay and the fitment factor you want to test. The dearness allowance starts at 63%, the rate from 1 July 2026. You can also enter a dearness allowance for the new pay, which starts at 0%. You get today's pay, the what-if pay and the change in rupees and percent.

Everything is worked out in your browser. Nothing you type is sent anywhere.

–

–

Enter your basic pay and a fitment factor, then press Calculate.

See full result

An 8th Pay Commission calculator lets you test what your monthly pay could look like if the new commission recommends a given fitment factor. It is a what-if tool, not a forecast: the commission has not reported, and no official fitment factor exists. You enter your current basic pay, the factor you want to test and, if you like, a dearness allowance for the new pay, and you see the change in rupees and percent.

How to use the 8th pay commission calculator

  1. Enter your current basic pay from the 7th Pay Commission pay matrix.
  2. Check the dearness allowance, which starts at 63%.
  3. Enter a fitment factor to test, such as 2.57 or 1.92.
  4. Add a DA on the new pay if you want one, then press Calculate.

Where the 8th Pay Commission stands

The Ministry of Finance constituted the commission by a resolution published in the Gazette of India on 3 November 2025 [3][4]. It has a chair and two members, and its recommendations are due within 18 months of its constitution, which points to about May 2027, with interim reports possible [3]. As of 16 November 2026 we found no report and no official fitment factor.

What the terms of reference say

Paragraph 2 of the resolution lists what the commission will study, and we read it in the Gazette text [3]. It says nothing about a fitment factor, a pay matrix or an effective date. The 1 January 2026 date that circulates in news reports came from a Cabinet release we could not open, so we do not state it as fact. That is why the factor is your input.

The dearness allowance today

The Department of Expenditure's order of 29 October 2026 raises dearness allowance from 60% to 63% of basic pay with effect from 1 July 2026 [1]. Basic pay means pay in the level of the 7th Pay Commission pay matrix, excluding special pay and similar items, and dearness allowance is a distinct element, not pay [1]. The order list shows that new rates are issued about twice a year [2], so the rate is a setting that we update.

How the allowance is rounded

The order says that fractions of 50 paise and above may be rounded up to the next rupee and fractions below 50 paise may be ignored [1]. The tool applies that rule to the dearness allowance, so 63% of Rs 18,005 is Rs 11,343.15 and shows as Rs 11,343, while 63% of Rs 18,050 is Rs 11,371.50 and shows as Rs 11,372.

The what-if calculation

New basic pay is your current basic pay multiplied by the fitment factor you enter. This is our own working: the commission may map levels differently, round to a pay-matrix step or restructure pay. Dearness allowance on the new pay is your assumed percentage, which defaults to 0% because we have no basis for any other figure. New total pay is the new basic pay plus that allowance.

A worked example

Take a basic pay of Rs 56,100 and 63% dearness allowance. The allowance is Rs 35,343 and the total is Rs 91,443. With a fitment factor of 2.57, the new basic pay is Rs 1,44,177. With no dearness allowance on it, the total is Rs 1,44,177, which is Rs 52,734 higher, or 57.67%. With a factor of 1.92 the new basic pay is Rs 1,07,712. These numbers are our own arithmetic.

Why the allowance is shown separately

When pay is restated, the dearness allowance is normally reset and rebuilt, but we found no page that says how the 8th commission will treat it. Showing the allowance on the new pay as a box lets you test your own assumption, and showing the old total beside it keeps the comparison honest.

Who it is for

The tool supports employees on the 7th Pay Commission pay matrix, since the order we read is for them. We did not open the orders for the 5th and 6th Pay Commissions, so pensioners and employees on older scales should not use the figures [2].

What it leaves out

House rent allowance, transport allowance, NPS, arrears from an earlier effective date and income tax are not included. A real revision can also change those allowances. Treat the result as an upper-level feel for the size of a change, not a payslip.

Using the result sensibly

Use the page to compare a few factors side by side, for example 1.92, 2.28 and 2.57, and look at the percentage change as well as the rupee change. A factor above 1 raises basic pay, but a lower dearness allowance on the new pay can offset part of it, which is why the optional box is there. Nothing here predicts what the commission will recommend.

What changes

The dearness allowance rate, the status of the commission and the fitment factor you choose are the moving parts. Settings for the rate are kept in one place in the tool and are dated to 1 July 2026 [1]. The next dearness allowance order is due around January 2027, and we will update it then.

Common mistakes

  • Treating the factor as official. No factor has been announced, so any value is a test.
  • Using gross pay as basic pay. Enter the basic pay of your pay-matrix level.
  • Adding DA twice. The new-pay DA box starts at 0% to avoid that.
  • Reading the result as a salary offer. It is a what-if for planning only.

What next

Use this often? Add 8th Pay Comm to your Home screen.

Frequently asked questions

What does the 8th pay commission calculator do?

It multiplies your basic pay by a fitment factor you choose, adds an optional dearness allowance and compares the result with your pay today.

Is there an official fitment factor?

No. The commission was constituted on 3 November 2025 and has not reported, and its terms of reference name no factor.

What is the dearness allowance now?

63% of basic pay from 1 July 2026, up from 60%, under the Department of Expenditure order of 29 October 2026.

How is the allowance rounded?

Fractions of 50 paise and above go up to the next rupee and smaller fractions are ignored.

Is the result a forecast?

No. It is a what-if using a factor you enter, and it leaves out HRA, transport allowance, NPS and tax.

What went wrong?

We only receive the reason you pick, never what you typed into the tool.

Thanks for your feedback.

More Finance Tools