A 3D printing cost calculator estimates what a print costs you: the filament that it uses, the time of the printer and a markup on top. Enter the length or the weight of the filament, its price, the printing time and your hourly rate, and it gives the final price.
How to use the 3d printing cost calculator
- Choose US or metric units.
- Choose whether you know the filament length or its weight.
- For a length, choose the material and enter the diameter.
- Enter the filament price, the printing time, the hourly rate and the markup, then press Calculate.
The three parts of the price
This calculator splits the price into three parts: the material cost, the cost of the printing time and a markup. That split is our own way of organising the sum. The material cost is the filament that the print uses. The printing time cost is the hours multiplied by an hourly rate. The markup is a percentage added on top of the two. The calculator shows each part, so you can see which one drives the price.
The material cost
The material cost is the density times π times the square of half the diameter, times the length, times the price. This is the volume of a thin cylinder of filament, which is π times the radius squared times the length, the cylinder volume formula in OpenStax's geometry text [2], turned into a mass by the density, and then into a cost by the price. Combining these steps, and converting to cubic centimetres, grams and kilograms, is our own working. The calculator does the conversions for you.
Densities
The calculator has a preset density for each material, in grams per cubic centimetre: ABS 1.05, PLA 1.27, PETG 1.25, PETT 1.45, HIPS 1.04 and TPU 1.30. These are the calculator's own defaults. Published figures differ a little: Prusa lists Prusament PLA at 1.24 grams per cubic centimetre [1], and UltiMaker lists its PLA at 1.24 [3], its ABS at 1.1 [4], its PETG at 1.27 [5] and its TPU 95A at 1.22 [6]. If your filament is a blend or a different brand, choose the custom option and type its density from the label or the data sheet, as real filaments differ from the plain polymers.
A worked example
This example is our own. Take PLA with a diameter of 1.75 millimetres, 100 metres long, at 20 per kilogram. The cross-section is 0.024053 square centimetres, the volume is 240.53 cubic centimetres and the weight is 305.47 grams, so the material costs 6.11. Five hours at 2 per hour is 10.00. The subtotal is 16.11, and a markup of 20 percent gives a final price of 19.33.
Filament by weight
Slicing programs often tell you the weight of filament that a print needs. If you know it, choose the weight option. The material cost is then the weight times the price per kilogram or per pound, and the diameter and the density are not needed. For 300 grams at 20 per kilogram, the cost is 6.00, which with 10.00 for printing time gives 16.00.
Checking against a spool
A quick check shows the sizes are sensible. A spool that holds 1,080 feet of filament, which is about 329.2 metres, would hold about 1,006 grams of 1.75 millimetre PLA at the calculator's density, close to a one kilogram spool. At 20 per kilogram, that is about 0.019 per foot. This check is our own working. The calculator shows the cost per metre or per foot in the results.
Time and the hourly rate
The printing time is multiplied by a cost per hour. It is up to you what that rate covers. You may want to include the wear on the printer, the electricity and your own time, as the calculator does not compute them separately. A rate of 2 per hour is an example from us. You can leave the time and the rate blank, which counts them as zero.
The markup
The calculator applies the markup to the sum of the material and the printing time, as (material + labour) × (100 percent + markup). A markup of 20 percent multiplies the subtotal by 1.2. If you sell prints, it covers the things that the other two parts do not, such as packing, failed prints and a profit. Leave the markup blank if you only want the cost.
US and metric units
In US mode, the length is in feet, the weight in ounces and the price is per pound. In metric mode, the length is in metres, the weight in grams and the price is per kilogram. The filament diameter is in millimetres in both modes, as the two usual sizes are 1.75 mm, the size of Prusament PLA [1], and 2.85 mm, the size of UltiMaker PLA [3]. The price has no currency symbol, so you can use any currency, and the results have none either.
What is not included
The calculator leaves out electricity, and it also leaves out failed prints, supports and waste, and the wear on the machine, unless you put them into the hourly rate or the markup. Treat the result as an estimate of a good print. Real costs vary with the brand of filament, the settings and the printer.
Common mistakes
- Entering the price of a spool as the price per kilogram. Divide by the spool weight first.
- Using the wrong diameter. Most filament is 1.75 or 2.85 millimetres.
- Forgetting the printing time. The hours are a large part of small prints.
- Entering the markup as a fraction. Enter 20, not 0.2.
What next
Use this often? Add 3d Printing to your Home screen.
Frequently asked questions
What is a 3D printing cost calculator?
A tool that estimates the cost of a print from the filament, the printing time and a markup.
How is the filament cost worked out?
The filament volume from its diameter and length, times the density, times the price per unit of weight.
What are the densities of common filaments?
The calculator's presets are ABS 1.05, PLA 1.27, PETG 1.25, PETT 1.45, HIPS 1.04 and TPU 1.30 grams per cubic centimetre. Published values differ slightly, so use the data sheet for exact work.
Does the calculator include electricity?
No. Put it in the hourly rate or the markup.
Can I enter the filament weight?
Yes. Choose by weight, and the density and diameter are not needed.
Sources
Was this tool helpful?
What went wrong?
We only receive the reason you pick, never what you typed into the tool.
Thanks for your feedback.